- 15 SLAS/ANSI deck positions and automatic tool exchange for 4 tools and gripper
- Volume range from 0.2 to 1,000 µL (depending on dispensing tools used)
- Compatible with tubes from 0.2 mL to 50 mL and micro and PCR plates up to 384 wells
- Optical sensor for detecting liquids, labware, tips
- MultiCon PC controller with simulation, network and software upgrade options
- Intuitive drag-and-drop-based software
- Optional UV lamp and air filter system for decontamination and clean air conditions
- Optional up to 3 thermal modules for heating or cooling (0 – 110 °C) of samples or reagents
- Integrated LEDs for deck illumination and visual feedback of system status like idle, run in progress or run finished
- Optional software extensions for handling barcodes and supporting regulated environments complaint to e. g. 21 CFR part 11
epMotion® 5075l
Product Information
- MultiCon PC, completely contained housing, epBlue software, keyboard, mouse, system for solid and liquid waste
- 100 – 240 V/50 – 60 Hz, 0,2 µL – 1 mL, (depending on dispensing tools)
You will find additional download material at the bottom of this page
Technical Data
Features
Technical Data
Specifications | epMotion® 5075l |
---|
Eppendorf ThermoMixer® |
|
Speed | − |
Time range setting | − |
Max. load | − |
Temperature range | − |
Heating rate | − |
Cooling rate above RT | − |
Cooling rate below RT | − |
Thermal module |
|
Max. number of modules | 3 |
Time range setting | 1 – 120 min |
Temperature range | 0 °C – 110 °C |
Heating rate | 9 °C/min |
Cooling rate | 4 °C/min |
Vacuum unit |
|
Vacuum max. output | − |
Suction range | − |
Suction time | − |
Volume range | 0,2 µL – 1 mL |
Operating mode | automation |
Autoclavable | yes (tools) |
Power supply | 100 – 240 V, 50 – 60 Hz |
Consumables | epT.I.P.S. motion tips as racks or reload |
Max. power consumption | 700 W |
Dimensions (W × D × H) | 108 × 62 × 81 cm / 43 × 25 × 32 in |
Product weight | 122 kg / 269 lb |
SLAS/ANSI positions | 15 |
Downloads: epMotion® 5075l
Filter
Reset all