Software Downloads

NOTE: The update tool will connect to the Eppendorf servers to download the latest software update for your electronic Eppendorf pipette. Instructions how to install the update are included in the .zip file.

WARNING: With a software update, the pipette is reset to factory settings and all settings and saved programs or favorites (if any) are deleted.


Download ep_update_tool_version_00.02.00.zip

Latest update/Version

11-Nov-2024
Rev. 06.03.00 for Multipette^® / Repeater^® E3 or E3x
31-Jul-2024
Rev. 05.07.00 for Eppendorf Xplorer^® , Xplorer plus or Xplorer plus Move It^®


Description of Changes
Revision 06.03.00 for Multipette^® / Repeater^® E3 or E3x

• Updated user interface design and graphics for error messages

Revision 05.07.00 for Eppendorf Xplorer^® , Xplorer plus and Xplorer plus Move It^®

• Added compatibility with Pipette Manager software 1.2.3
  

---

Previous Versions

24-Jan-2024
Revision 05.06.00 for Eppendorf Xplorer^® , Xplorer plus and Xplorer plus Move It^®

• Several improvements and bugfixes when using the pipette with Eppendorf Pipette Manager
  

06-Mar-2023
Rev. 05.05.00 for Eppendorf Xplorer^® , Xplorer plus and Xplorer plus Move It^®

• Added compatibility with Pipette Manager software 1.1.3

04-Nov-2022
Revision 06.02.00 for Multipette^® / Repeater^® E3 or E3x

• Several improvements and bugfixes when using the pipette with Eppendorf Pipette Manager
  

23-May-2022
Rev. 05.02.00 for Eppendorf Xplorer^® , Xplorer plus and Xplorer plus Move It^®

• Updated device drivers for new memory module in pipettes produced from 2022 (no changes for pipettes purchased before 2022)

07-Mar-2022
Rev. 05.01.00 for Eppendorf Xplorer^® , Xplorer plus and Xplorer plus Move It^®

• Added support for new circuit board in pipettes produced from 2022 (no changes for pipettes purchased before 2022)

Rev. 06.01.00 for Multipette^® / Repeater^® E3 or E3x

• Optimized overvoltage protection
• Improved wake-up/sleep function
• Improved read & write function of user settings

16-Jul-2021
Rev. 04.02.00 for Eppendorf Xplorer^® , Xplorer plus and Xplorer plus Move It^®

• Improved battery capacity measurement
• Improved read & write function of user settings
• Support for Eppendorf Xplorer® connect WiFi module for connection to Eppendorf Pipette Manager
• Integration of an automatic blow out in reverse pipetting mode
  

Rev. 05.01.00 Multipette^® / Repeater^® E3 or E3x

• Improved battery capacity measurement
• Improved read & write function of user settings

NOTE: Empty USB flash drive with at least 512 MB storage space in FAT32 format needed to perform an update. Instructions how to install the update are included in the .zip file. Important: Please insert the USB drive only after booting up the Pipette Manager.

Download Pipettemanager_software_update.zip

Latest update/Version
31-Jul-2024
Rev. 1.2.3

Description of Changes

• Added additional features to the "Pipetting Records" feature:
• • Records can now be exported in .CSV and .PDF formats (previously only PDF)
  • Users can now add "Quick Notes" to recorded activities which are included in the Record
  • The Record header can now be customized with individual logos (previously only Eppendorf logo)

---

Previous Versions

31-Mar-2023
Rev. 1.1.3

Description of Changes

• Added new feature Pipetting Records, allowing documentation of pipetting activities and export via PDF file
• Improved WiFi communication with connected pipettes and tablets
• Minor improvements

15-Nov-2021
Rev. 1.0.10

Description of Changes

• Added support for Move It® Adjustable Tip Spacing Pipettes
• Prevention of firmware downgrades for pipettes with a newer firmware version during the firmware update via the VisioNize® pipette manager
• Minor bugs fixed

09-Mar-2021
Rev. 1.0.06

Description of Changes

• Initial product version

Description of changes:
Firmware revision 1.16.0.0 implements compatibility to the VisioNize Lab Suite

Date/File/Version:
02-june-2021
VisioNize_box_firmware_update

NOTE: The RackScan Analyzer software is used to read 2D data matrix codes on consumables and to transfer the information contained in the 2D data matrix codes for further use in software applications.
The RackScan Analyzer software was developed to be used with RackScan b and RackScan s.
Description of Changes
The zip-file includes the following files:

• Eppendorf RackScan Analyzer Installer
• Software Manual including installation guide

Date/File/Version
20-Dec-2019
Version: 3.15 (build 3129)

Description of Changes
Software version 3.5.0 introduces a new application feature for thawing cells which is exclusively available for the Eppendorf ThermoMixer^® C in combination with the new Eppendorf SmartBlock™ cryo thaw.[1] Furthermore there are several minor additions, updates and fixes for the Eppendorf ThermoMixer^® C, ThermoMixer^® F, and ThermoStat^® C such as
• User notifications by LEDs and simple melodies in special programs (e.g. “Thawing cells”)
• Mixing programs saved on program keys can be reset to their defaults (only ThermoMixer C)
• Extended communication with VisioNize box
• Translations for dialogs which were previously only available in English
• Adapted lengths of display texts to better fit into GUI
• Improved memory handling (see warning below)
• Fixed scrolling behavior in menus with many entries

Date/File/Version
26-Nov-20

Description of Changes
Analog I/O software revision B.00 includes the ability to recognize and control up to 8 Analog I/O modules from a single installed version, and addresses previous issues with communication loss.

Date/File/Version
30-Jan-2019
Update_M1372_B.00.zip
Version Analog B.00

WARNING: Do not attempt to install this update on BioCommand® Batch Control Plus installations. Database files are not compatible and may result in loss of data. For BioCommand® Batch Control Plus updates, please contact your local sales/service representative.

Description of Changes

Revision 6.03 includes the following enhancements:

• SQL Server updated from SQL Server 2008 Express to SQL Server 2017 Express
• SQL login password length and complexity increased
• Publisher certificate added to BioCommand and NBS OPC Server wizard applications

Date/File/Version
30-Jun-2023
v6.03
Download here

For BioCommand Batch Control Plus, a specific software update procedure is required for Revision 5.01. Please contact your local Eppendorf service representative for assistance.

WARNING: Do not attempt to install this update on BioCommand® Batch Control Plus installations. Database files are not compatible and may result in loss of data. For BioCommand® Batch Control Plus updates, please contact your local sales/service representative.

Description of Changes

Revision 6.03 includes the following enhancements:

• SQL Server updated from SQL Server 2008 Express to SQL Server 2017 Express
• SQL login password length and complexity increased
• Publisher certificate added to BioCommand and NBS OPC Server wizard applications

Date/File/Version
30-Jun-2023
v6.03
Download here

Software revision 02.08 incorporates the following solutions/additions to improve the performance of your bioprocess controller:

• 1SLPM and 5SLPM TMFC’s with different turndown ratios support is added

Date/File/Version
25-March-2021
1390_1203_02.08.zip
Version 02.08

Software revision 04.07 incorporates the following solutions/additions to improve the performance of your bioprocess controller:

• Added 2-Point calibration for variable speed pumps
• Updated the keyboard to add additional characters.
• Increased Combined Total/Max Flow limits when using Low Flow Multi 1SLPM TMFC Drawers in Gas Mix and Manual Modes.
  • 4 Gas Mix, 3 Gas Mix, 4 Gas Manual, 3 Gas Manual – 3 SLPM
  • O2 Gas Mix, 2 Gas Manual – 2 SLPM
  • N2 Gas Mix, 1 Gas Manual – 1 SLPM (No Change)
• Various Minor Bugs

Date/File/Version
10-November-2023
M1379-1203_Rev_04_07_0011.zip
Version 04.07
Download here

Please contact your local Eppendorf service representative for assistance

Please contact your local Eppendorf service representative for assistance

Description of Changes:Software revision 02.01 incorporates the following solutions/additions to improve the performance of your bioprocess controller:

• Hamilton ARC sensor compatibility
• All stop button
• Scale Up Assist (Custom vessel & BioFlo 320 water-jacketed vessels have been added)

Date/File/Version
14-June-2024
BioFlo 720 Updates.zip

Description of Changes
Update resolves communication errors with PC COM ports.

Date/File/Version
30-Jan-2019
M1295 RS232 Device Interface Kit Rev B.00 - Update.zip
Version B

Please contact your local Eppendorf service representative for assistance
Latest version 1.4.0.r113
This software version is compatible to DASware control 6.3 or higher

Note:

Download the .zip file and extract the containing .apk file to the top level of an empty USB drive. Further instructions for installing the software update can be found in the user manual and epMotion 96 Flex software.

Download epMotion96FLexSW1.3FW1.14_2.zip

Change descriptions:

• Bugfixing
• Additional service functionality implemented
  

Date/File/Version:

06 Aug. 2024 / epMotion96Flex.apk / SW1.3 FW1.14