Can I still change the settings when I have started the Centrifuges 5804/ 5804 R or 5810/ 5810 R?

Yes, the speed, the time and the temperature can be changed even when the centrifuge is running. To do this, please press the SPEED, TIME or TEMP key and change the values by pressing the arrow keys.

Is it possible to adjust the Centrifuge 5804/ 5804 R or 5810/ 5810 R so that it stops on its own, meaning without active braking?

Yes. Free deceleration of your centrifuge can be achieved by setting the braking level to 0.

"Clean rotor" appears on the display of my centrifuge. Do I now need to remove the rotor from the centrifuge, and, if yes, how?

This display appears every 200 centrifugation runs. For cleaning the rotor and the rotor chamber, the rotor must first be removed from the centrifuge. To do this, loosen the rotor nut by turning it counter-clockwise with the supplied rotor key. Please clean the rotor and rotor chamber only with mild cleaning agents (e.g. 70% alcohol solutions or commercially available alcoholic disinfectants).

How are the Centrifuges 5804/ 5804 R and 5810/ 5810 R protected during transport? Is there a transport protection device?

No, the Centrifuges 5804/ 5804 R and 5810/ 5810 R do not come with a transport protection device. They are packaged in polystyrene for protection. Because the rotor is not in the centrifuge during transport, there are no movable parts to make a transport protection device necessary.

How many times can aluminum rotors be autoclaved?

Aluminum rotors can be autoclaved up to 100 times for 20 minutes at 121 °C.

Do the adapters for the 0.2/ 0.4/ 0.5/ 0.6 mL tubes, which are designed for the rotors F-45-30-11 and FA-45-30-11, also fit into the rotor F-34-6-38 with the adapter 5804 770.005 (for 1.5/ 2.0 mL tubes)?

Yes, these adapters can also be used in the rotor F-34-6-38 with the adapter 5804770005.

How does the Centrifuge recognize that a different rotor is in use?

A new rotor automatically will be recognized as soon as it starts moving. Moving and recognition of the rotor can be performed manually by making it spin counterclockwise (roughly 200 rpm necessary), or by turning the Centrifuge on. As soon as the rotor starts spinning it will be recognized. When indicated, the Centrifuge shuts down under specification of max. speed in case the indicated max. speed of the previous rotor was higher. In this case the Centrifuge must be restarted.

The Centrifuges 5804/ 5804 R and 5810/ 5810 R are programmable. What is saved during the programming?

All data is saved that can also be entered manually, such as rotational speed or RCF, maximum radius, run time, acceleration and braking ramps, "at set rpm", temperature.

Does Eppendorf offer a rotor for PCR strips for Centrifuges 5804/ 5804 R or 5810/ 5810 R?

The PCR strip rotor F-45-48-PCR is available under the order number 5804 735.005. It can centrifuge up to 6 x 8-well strips at 12,000 rpm / 15,350 x g.

There are 2 different adapters for the 15 mL tubes. One for tubes with round bottoms and one with a conical bottom for conical tubes. Can I not use one adapter for both tubes?

No, unfortunately this is not possible. In order to be able to reach the high rotational speeds, the adapters must be form-locking.

How does the Centrifuge 58xx and 59xx recognize that a different rotor is in use?

A new rotor will automatically be recognized as soon as it starts spinning. Recognition of the rotor can be performed manually by making it spin counterclockwise (roughly 200 rpm necessary), or by turning the Centrifuge on. As soon as the rotor starts spinning it will be recognized. In case the indicated max. speed of the previous rotor was higher, speed must be confirmed in a display pop-up. The user has the choice between the rotor-specific max. speed or a lower speed, that can be set directly.

What is the minimum rotational speed (rpm) of the Centrifuge 5804/ 5804 R or 5810/ 5810 R, and in which increments can it be increased?

The minimum rotational speed is 200 rpm, irrespective of the inserted rotor. The minimum rotational speed can be increased in increments of 10 rpm up to 5,000 rpm and then in increments of 100 rpm.

How can I recognize in the display of the Centrifuges 5804/ 5804 R or 5810/ 5810 R whether I have selected "rpm" or "rcf"?

For rcf, a "*" is displayed in front of the value. rpm is not indicated by a symbol.

Does the Centrifuge 58xx R has an energy saving function?

Yes, the ECO shut-off automatically switchs off the compressor after 8 hours of non-use. The device has a stand-by button.

Can the new rotor generation be used with older Centrifuges without retrofitting?

Yes, you can use the new rotors from software version 8.4 onwards. From versionb 7.0 on a software update to version 8.4 can easily be performed by trained service technician. In case of older software versions, the complete PCB control/frequency converter must be replaced. You can see the current software version of your centrifuge briefly on the display after switching it on.

Is it possible to centrifuge 50 mL and 15 mL tubes together in one rotor?

Yes, it is possible, provided that the rotor is loaded symmetrically. This means that the 50 mL tubes and the 15 mL tubes are positioned opposite one another and are positioned symmetrically. Please use the appropriate adapters for the tubes.

The writing on one rotor of the Centrifuge 5804/ 5804 R or 5810/ 5810 R says, for example, "6x125g". Does this mean that the centrifuge only enables an RCF of 125 or that it can only be loaded with a maximum of 6 times 125 gram?

This label states that the rotor can be loaded with a maximum of 6 x 125 gram. "g" is the official abbreviation for "gram". Where "g" is used as an abbreviation of "g-force", the number and "x g" are used. Example: 10,800 x g.

How big is the g-force difference between the lowest and the highest plate when loading a bucket of the rotor A-2-DWP with four microplates?

The following g-forces are reached with the rotor A-2-DWP: Lowest plate: 2,250 x g Highest plate: 1,825 x g

Do the adapters for the 0.5 mL tubes fit into the rack for 1.5/ 2.0 mL tubes of the rotor T-60-11 for centrifuge 58xx?

Yes, the adapters can be inserted into the rotor for centrifugation of 0.5 mL tubes.

In which rotor is it possible to centrifuge 50 mL DIN glass tubes?

50 mL DIN glass tubes (diameter 34 mm, length 100 mm) can be centrifuged in the adapter for 50 - 75 ml tubes (order number 5804 760.000) of the swing-bucket rotor A-4-44 or adapter 5810 760.003 of swing-bucket rotor A-4-62 . Depending on the length of the tube, the uppermost module of the adapter can be removed for centrifugation of 50 mL DIN glass tubes.

For which centrifuge can we use our mobile tables 5921 000 010 and 5921 000 012?

The mobile tables can be used for centrifuges 59xx as well as 58xx.

What is the meaning of the red knob on the rotor lid?

A fixed-angle rotor with a red knob on the rotor lid indicates aerosol-tightness.

Is it possible to switch off the brakes of Centrifuges 5804/ 5804 R or 5810/ 5810 R, e.g. when centrifuging a gradient?

Yes. Free deceleration of your centrifuge can be achieved by setting the braking level to 0.

Is there an adapter to spin microscope slides in centrifuge 5804 / 5804 R / 5810 / 5810 R?

Up to 12 slides can be inserted into the CombiSlide adapter 5825706005 and then centrifuged in the swing out rotors of Centrifuge 5804/ 5804 R or 5810/ 5810 R.

How often does the OQ need to be carried out for a centrifuge?

The company is responsible for technical checks of devices. Eppendorf recommends regular device qualifications depending on the intensity of use, however, they should be carried out at least once a year.

Why should I have my centrifuge serviced at regular intervals?

To ensure the optimum performance and precision of your device. This also enables the early detection of any defects which can then be corrected easily. Performing a large number of cycles increases the susceptibility to rotor damage. Any damage can be detected at an early stage during a qualified inspection, i.e. the rotor can be replaced before any serious damage occurs.

How can I clean my centrifuges myself?

Use a neutral cleaning agent for cleaning. We recommend using alcohol or alcohol-based disinfectants for disinfection. Please ensure that the applicable legal regulations and guidelines are observed when selecting the disinfection method. You can find a detailed description in the video "Centrifuge Maintenance - The basis for your lab safety" or in the operating manual which can be downloaded from our website.

Is the rotor inspection part of the service programs?

No, it can be booked in addition to service programs and depends on the type of rotor (fixed-angle rotor or swing-bucket rotor).

How often does my centrifuge need to be serviced?

This depends on how intensively it is used and varies depending on the load on the device. However, it is recommended to have the centrifuge serviced at least once a year.

Shall we close the lid of the refrigerated centrifuge after the centrifugation is finished?

You should close the lid, if using the centrifuge frequently at lower temperatures. When not in use (e.g. over night) switch off the centrifuge and clean the rotor chamber. The lid should stay open to dry.

What do you need to look out for before carrying out a service?

The device needs to be decontaminated first. The device must be freely accessible and all samples removed from the device.

Can I carry out software updates myself?

No. Software updates for centrifuges with a USB interface can be carried out easily by a qualified Eppendorf Service technician via the existing USB port. This ensures that safety factors are up-to-date, that the latest rotors are detected and the running of the machine is optimized with the latest parameters.

How much are the different centrifuge service programs?

The cost depends on the model and on the service that is performed. Please contact your local Eppendorf Service.

What types of training or online training do you offer to enable me to improve my skills?

Please visit the Eppendorf webpage about the Eppendorf Training Center or contact your local Eppendorf Service for further information and a quotation.

Please contact your local Eppendorf Service Team. You find the contact data on our homepage or in the information materials.

What is IQ or OQ and what do I need them for?

Installation and operational qualification; the IQ documents that the device has been delivered and installed correctly. The OQ checks the correct functioning of a device. IQ/OQ ensure that your quality management requirements are met and that your device operates properly and in accordance with the manufacturer’s specifications.

text.skipToContent text.skipToNavigation

JP | JPY

結果がありません

検索の提案

製品群

Show all Product Families ()

商品番号

Show all Articles ()

コンテンツ

Show all Content ()

Centrifuge 5804/ 5804 R - 卓上遠心機

Centrifuge 5804/5804 R benchtop centrifuges

Centrifuge 5804/5804 R – Centrifuge Rotor S-4-72 buckets and adapters are autoclavable

Centrifuge Rotor A-2-DWP with buckets for Centrifuge 5804/5804 R

Centrifuge Rotor FA–45–6–30 with QuickLock® lid mechanism

Eppendorf centrifuge rotor Rotor F-34-6-38 for Centrifuge 5804/5804 R

Eppendorf Rotor FA-45-48-11 with Eppendorf QuickLock® technology

製品情報

高速卓上型遠心機Centrifuge 5804/5804 Rは、中処理能力の分子生物学アプリケーションに適しています。0.2 mL～250 mLまでのすべての一般的なチューブフォーマットとプレートを処理し、幅広いローターとアダプターのおかげで高い汎用性を提供します。

製品情報をもっと見る

追加でダウンロードできる材料がありますこのページの最後に

Services (24)

ローター (14)

アクセサリー (2)

24 Services

遠心機のサービス - 設置

多目的遠心機, 非冷却

製品のさらなる情報

カタログ番号 0082020161

遠心機のサービス - 設置

多目的遠心機, 冷却付

製品のさらなる情報

カタログ番号 0082020191

遠心機のサービス - AdvancedCare

多目的遠心機, 非冷却 , サービス契約

製品のさらなる情報

カタログ番号 0082020327

遠心機のサービス - AdvancedCare

多目的遠心機, 冷却付, サービス契約

製品のさらなる情報

カタログ番号 0082020328

遠心機のサービス - PremiumCare

多目的遠心機, 非冷却 , サービス契約

製品のさらなる情報

カタログ番号 0082020322

遠心機のサービス - PremiumCare

多目的遠心機, 冷却付, サービス契約

製品のさらなる情報

カタログ番号 0082020323

遠心機のサービス - Device Check

基本クリーニングと充填項目検査
冷却なしの多目的遠心機

製品のさらなる情報

カタログ番号 0082020272

遠心機のサービス - Device Check

基本クリーニングと充填項目検査
冷却ありの多目的遠心機

製品のさらなる情報

カタログ番号 0082020273

遠心機のサービス - Preventive Maintenance

多目的遠心機, 冷却付, フルメンテナンス

製品のさらなる情報

カタログ番号 0082020263

遠心機のサービス - Preventive Maintenance

多目的遠心機, 非冷却 , フルメンテナンス

製品のさらなる情報

カタログ番号 0082020262

製品をもっと見せる

お客様のショッピングカートに追加されました。

製品情報

特徴

品質と信頼性で有名な卓上型遠心機であるCentrifuge 5804/5804 Rは、最大20,913 x g (14,000 rpm)の速度を必要とする中処理能力アプリケーション向けの最も費用効果の高いソリューションを提供します。 0.2 mL～500 mLまでのチューブとボトルに対応するローターとアダプターの幅広い選択、およびMTP、PCR、ディープウェルプレートで真の汎用性を体験してください。
スイングバケットロータおよびアダプターは、0.2 mL～250 mLのチューブおよびボトルに対応し、固定角度ローターは0.2 mL～85 mLの容器に対応します。プレートローターは、PCR・細胞培養・ディープウェルプレートなど、すべての一般的なタイプのマルチウェルプレートの遠心分離を実行する準備ができています。

ローター S–4–72

中処理能力の分子アプリケーションには、Eppendorfスイングバケット遠心ローターRotor S–4–72を使用してください。最大3,234 x g (4,200 rpm)の速度を提供。0.2 mL～250 mLのすべての一般チューブフォーマットを取り扱うために幅広いアダプターを入手できる Rotor A–4–62と比べ最大36 %エネルギー節約が可能な空気力学ラウンドバケット設計バケットおよびアダプターはオートクレーブ可能

高速遠心分離用ローター

Eppendorf Rotor FA–45–6–30 (6 x 50 mL) Eppendorf QuickLock^®リッドは、Centrifuge 5810 Rで20,130 x g (12,100 rpm) in、5804、5804 R、5810で16,639 x g (11,000 rpm)の最高速度で使用できます。危険なサンプルの安全な遠心分離のためにエアロゾル密閉であり、高速ローターリッドロックのためにEppendorf QuickLockテクノロジーを使用しています。ローター重量が3.2 kgと軽量化されており、取扱いが改善し、日常の作業がより快適になります。 45°のボアホール角度によりペレットの付着を低減（チューブ壁に沿って）

あなたはEppendorf製品の誇り高い所有者ですか？すでに登録していますか？
Eppendorf製品を私たちに登録すると、次のものが得られることをご存知ですか？
• 100 epPoints^®の引換（登録した製品ごと）は、リワードショップで利用できます
• 遠心機、シェーカー、CO2インキュベーター、またはサイクラーを登録すると、さらに3か月の保証が受けられます
• Eppendorf限定の抽選へのエントリー（登録した製品ごとに）
• EppendorfのWebに投稿されるあなたの個人的な製品ストーリーを共有してください。

始めるのはとても簡単です！方法：
1. Eppendorf Appをダウンロードし、スキャンして登録します。
2. 弊社のWebページにアクセスし、myEppendorfアカウントにログオンして、製品のシリアル番号を入力します。
詳細は次をご参照ください：www.eppendorf.com/productregistration

End-of-Life

（寿命の終わり）梱包材の廃棄
フリーザーの梱包材には、木製パレット、段ボール、プラスチック製のダストカバー、発泡部品など、さまざまな素材が使われています。材料のリサイクルは日々ますます重要になっています：ヨーロッパでは、段ボール材料のほぼ100％がリサイクルされていることをご存知ですか？当社のフリーザー包装用段ボールの材料は、約50%のリサイクル材料で構成されています。フリーザー段ボールの梱包材も収集し、組織の適切な収集コンテナーに廃棄することにより、貴重な原料をリサイクルするグローバルな持続可能性イニシアチブをサポートしてください。LD-PE製のプラスチック製ダストカバーと発泡部品に関しては、PE材料をリサイクルできる専用のリサイクルパートナーを選択することをお勧めします。利用可能なリサイクルオプションについては、地元の廃棄物処理業者または施設管理チームにお問い合わせいただくことをお勧めします。

装置の廃棄
当社のフリーザーは何年も使用可能ですが、交換が必要になった場合には、地域の要件に従って廃棄するようお願いします。積極的に冷却する装置の経験を持つ、認定された地元のリサイクルパートナーを強くお勧めします。「地元」で処理することは輸送の負荷を軽減します。また、冷却液を安全かつ持続的に除去およびリサイクルすることは、「認証」という点でも推奨されています。

除染
この機器は、ラボで使用されたり、あるいは生物学的試料の取り扱いのために使用されました。処分すべき装置の汚染を適切に除去してください。地域の要件を確認してください。詳細については、地域のバイオセーフティ担当者や廃棄物担当者にお問い合わせください。地域のリサイクル業者に特別な指示や文書化要件があるか確認してください。Eppendorf除染フォームシートを参考として使用できます。