How is the Centrifuge 59xx protected during transport? Is there a transport protection device?

No, the Centrifuge 59xx does not come with a transport protection device. It is packaged in polystyrene for protection. Because the rotor is not in the centrifuge during transport, there are no movable parts to make a transport protection device necessary.

Can I still change the settings when I have started the Centrifuge 5920 R/ 5910 R?

Yes, the speed, the time and the temperature can be changed even when the centrifuge is running. To do this, please press the arrow keys below SPEED, TIME or TEMP values in the display. To change the radius or acceleration and breaking ramps please use the enter/menu key and the menu arrow keys to proceed.

How can I recognize in the display of the Centrifuge 59xx whether I have selected “RPM" or “RCF"?

Whether you have selected RPM or RCF, is displayed next to the RPM and RCF value respectively in the display.

What is the minimum rotational speed (rpm) of the Centrifuge 59xx, and in which increments can it be increased?

The minimum rotational speed is 10 rpm (1 x g), irrespective of the inserted rotor. The minimum rotational speed can be increased in increments of 10 rpm (10 x g) up to 5,000 rpm (3,000 x g). 5,000 – 14,000 rpm (3,000 – 22,132 x g) can be set in increments of 100 rpm (100 x g).

Is it possible to adjust the Centrifuge 59xx in a way that it stops on its own, meaning without active braking?

Yes. Free deceleration of your centrifuge can be achieved by setting the braking level to 0.

Centrifuge 59xx is programmable. What is saved during the programming?

All manually entered data such as rotational speed or RCF, maximum radius, run time, acceleration and braking ramps, "at set rpm", temperature can be saved. Further, to delay the start for incubation reasons e.g., a timer can be set to up to 60 min.

Does Eppendorf offer a rotor for PCR strips for Centrifuge 59xx?

A PCR strip rotor is not available. Adapters (5425 715.005) for single PCR tubes are available for 1.5/2 mL microtube rotors.

Is it possible to spin 50 mL and 15 mL tubes together in one rotor?

Yes, it is possible, provided that the rotor is loaded symmetrically. This means that the 50 mL tubes and the 15 mL tubes are positioned opposite one another and are positioned symmetrically. Please use the appropriate adapters for the tubes.

How big is the g-force difference between the lowest and the highest plate when loading a Plate/Tube-bucket of rotor S-4x1000 with 7 microplates?

The following g-forces are reached with the rotor S-4x1000: Highest plate: 3,000 x g (radius: 196 mm); Lowest plate: 1,948 x g (radius: 127.3 mm).

How big is the g-force difference between the lowest and the highest plate when loading a plate bucket of the rotor S-4x750 with 4 microplates?

The following g-forces are reached with the rotor S-4x750: Highest plate: 4.035 x g (radius: 163.5 mm); Lowest plate: 3,087 x g (radius: 129 mm).

Is there an adapter for slides?

Up to 12 slides can be inserted into the CombiSlide adapter (5825 706.005) and then centrifuged in the appropriate swing-bucket rotors (plate bucket or universal bucket with plate carrier) of Centrifuge 59xx.

Can rotor S-4x750 be loaded with a mixture of round tube and plate buckets ?

Yes, this so-called mixed loading is possible. Please ensure that the same type of buckets are always used in opposing positions.

Can rotor S-4x1000 be loaded with a combination of round tube, plate and high capaciy-buckets?

Yes, this so-called mixed loading is possible. Please ensure that the same type of buckets are always used in opposing positions.

There are 2 different adapters for 15 mL tubes. One for tubes with round bottom and one for conical tubes. Why can’t I use one adapter for both tubes?

No, unfortunately this is not possible. In order to be able to reach the high rotational speeds, the adapters must be form-locking.

Can the rotors of Centrifuge 5810/ R and 5804/ R be used for Centrifuges of the 59xx family?

No, this is not possible. Please do only use rotors which are labeled with the Centrifuge name 5920 R or 59XX.

The writing on one rotor says, for example, "6 x 125 g". Does this mean that the centrifuge only allows for a RCF of 125 or that it can only be loaded with a maximum of 6 times 125 gram?

This label states that the rotor can be loaded with a maximum of 6 x 125 gram. "g" is the official abbreviation for "gram". Where "g" is used as an abbreviation of "g-force", the number and "x g" are used. Example: 10,800 x g.

Can rotors, buckets and adapter be autoclaved?

Yes, fixed-angle rotors, rotor lids, buckets, bucket-caps and adapter can be autoclaved for 20 minutes at 121 °C. The 59xx swing-bucket rotor crosses can not be autoclaved. After 50 autoclaving cycles, we strongly recommend to exchange aerosol-tight caps and sealings in QuickLock-rotors.

"Does the Centrifuge 59xx have an energy saving function?“

Yes, the ECO shut-off automatically switches off the compressor after 8 hours of non-use (standard setting) or if desired, after 1, 2 or 4 hours. The device has a stand-by button. For example, centrifuge 5920 R has an ultra low power consumption of only <2 W in stand-by mode. Further, the extraordinary high centrifuge efficiency limits the max. power consumption to 1,300 W.

What is the meaning of the red knob on the rotor lid?

A fixed-angle rotor with a red knob on the rotor lid indicates aerosol-tightness.

How does the Centrifuge 58xx and 59xx recognize that a different rotor is in use?

A new rotor will automatically be recognized as soon as it starts spinning. Recognition of the rotor can be performed manually by making it spin counterclockwise (roughly 200 rpm necessary), or by turning the Centrifuge on. As soon as the rotor starts spinning it will be recognized. In case the indicated max. speed of the previous rotor was higher, speed must be confirmed in a display pop-up. The user has the choice between the rotor-specific max. speed or a lower speed, that can be set directly.

What is to be considered when using rotor S-4x1000 and 1-liter bottles?

Each position of the rotor must be equipped with a bucket. Centrifugation with only 2 x 1-Liter bottles is possible. But we recommend to load the 4 positions in the rotor equally to reduce vibration and noise.

What is the advantage of FastTemp?

At rotor standstill (continuous cooling) the cooling process is slower than while centrifugation. With FastTemp you directly start cooling without samples and with temperature- and rotor-specific centrifugation speed.

What is “FastTemp pro”?

With FastTemp pro you can program your 59xx to start the FastTemp run at a defined point of time, once or regularly.

What do I have to consider when using FastTemp function with aerosol-tight buckets?

Cooling of buckets with aerosol-tight caps takes longer and may lead to underpressure in the buckets. Don´t use aerosol-tight caps while FastTemp is running.

Which possibilities do I have for round bottom tubes longer than 120 mm?

You can use rotor S-4x1000 with round buckets for 13 and 16 mm tubes of 121 and 125 mm height respectively.

Can I perform a software upgrade on my own?

No. Software upgrades on 59xx centrifuges can easily be performed via USB port by a trained service technician. He ensures that the technical parameters, such as imbalance tolerance, are correctly adapted to the new software version.

What is the radius correction for and when do I need it?

The conversion from speed to g-force is based on the biggest radius of the rotor. If you are using an adapter for tubes, you can adjust the value for the radius manually. You can find the value for the radius of an adapter in a rotor in the technical data of the rotor. The adjustment of the radius is important when exact reproduction of protocols is necessary to ensure accurate results.

What does “at set rpm” mean?

With “at set rpm” you can specify when time counting should begin, immediately or when 95 % of the speed has been reached.

Do you have adapters for conical bottles 175-250 or 500 mL?

Yes. 175-250 mL conical bottles can be used with Eppendorf adapters with flat bottom. For this adapter you will further need a special conical form insert from the tube supplier, which has to be placed in the Eppendorf adapter. For 500 mL conical Corning tubes Eppendorf has a special adapter for which no extra insert is needed.

What do I have to consider when loading buckets incompletely?

Buckets must be loaded symmetrically in a way that the load on the pivots is even. This will be reached by concentrating the load around the balance point of the bucket. Ensure that buckets swing freely by carrying out a manual spinning test. The buckets should swing out correctly without touching the rotor cross or the rotor chamber.

Can we use our rolling cabinet 5821 020 010 for the 5920R?

The rolling cabinet 5821 020 010 is too small for the 5920R. Our Mobile Tables 5921 000 010 and 5921 000 012 are an alternative.

For which centrifuge can we use our mobile tables 5921 000 010 and 5921 000 012?

The mobile tables can be used for centrifuges 59xx as well as 58xx.

text.skipToContent text.skipToNavigation

CN | CNY

未找到任何结果

搜索建议

产品系列

Show all Product Families ()

文章

Show all Articles ()

内容

Show all Content ()

Centrifuge 5920 R - 大型离心机

Eppendorf Rotor FA-6x250 with adapters for Centrifuge 5920 R

Eppendorf Rotor FA-6x250 with 250 mL bottles for Centrifuge 5920 R

Eppendorf Rotor S-4x1000 for large centrifuges

Centrifuge 5920 R Rotor S-4x1000 and S-4xUniversal-Large

Eppendorf Rotor S-4xUniversal-Large for large centrifuges

Centrifuge 5920 R Rotor S-4x1000 with round buckets

Eppendorf QuickLock® caps for benchtop centrifuge Centrifuge 5810/5810 R

Universal centrifuge rotor adapters for conical tubes, plates and bottles

产品信息

Centrifuge 5920 R 是一款大型台式冷冻离心机，具备卓越性能与超大容量，适用于高通量应用。

显示更多产品信息

Good-design

Scientists choice Awards 2017

索取演示版

您可以在以下网址找到其他下载资料本页面底部

产品 (1)

组合套装 (6)

Services (16)

转子 (9)

附件 (2)

1 产品

离心机 5920 R (EU-IVD)

按键式, 冷冻型, 不含转子
230 V/50 – 60 Hz (CN)

更多产品详情...

目录编号 5948000093

显示更多产品

已添加到您的购物车

产品信息

技术数据

特征

大型台式离心机Centrifuge 5920 R融合超大容量与紧凑型人体工程学产品设计。它的尺寸与 3 L 冷冻竞品相似，但它能够提供高达 4 x 1000 mL 或 52 x 50 mL 离心管的超大容量。简化高通量离心流程，让日常工作更加愉快。

适用于离心管和工作板的通用吊篮

适用于离心管和工作板的通用吊篮，节省宝贵的时间、金钱和空间。使用 Rotor S-4xUniversal-Large，您只需更换适配器而非转子吊篮，便可离心锥形管、工作板和试剂瓶。无需更换吊篮、使用单独吊篮或存放不同吊篮。

4 升超大容量

Centrifuge 5920 R适配 1 升 Nalgene 标准试剂瓶，为台式离心机领域树立全新标准。与其他定制 1 升试剂瓶相比，Nalgene 试剂瓶较窄，与较宽的试剂瓶相比更能确保颗粒品质。4 x 1000 mL 超大容量让您处理更多样品，无需多次离心。

先进的操作系统

Centrifuge 5920 R将出色的功能与先进的操作系统相结合。该系统搭载菜单驱动的多语言操作菜单以及大尺寸背光显示屏幕，可以保存多达 99 个用户定义程序和 5 个程序键，以方便访问常规程序。FastTemp pro功能可根据预设时间和日期实现快速自动预冷。

您是否拥有 Eppendorf 产品？已经注册了？

您知道吗，每款 Eppendorf 注册产品均可在我们的奖励商店兑换以下?
• 100 点 epPoints^®
• 当您注册离心机、振动试验机、CO2 培养箱或循环仪时，可享受额外 3 个月的保修服务
• 每款注册产品均可参加一次 Eppendorf 独家抽奖活动
• 在 Eppendorf 网站上分享您的个人产品故事

操作非常简单！您可以 -
1. 下载 Eppendor f应用程序，扫描并注册，或者
2. 访问我们的网页，登录 myEppendorf 帐户并输入产品序列号
更多信息敬请访问：www.eppendorf.com/productregistration

废弃产品

包装处置
离心机包装包含不同材料，包括木制托盘、纸板、塑料防尘罩和一些泡沫部件。材料的回收变得越来越重要：您知道欧洲几乎回收所有的纸板材料吗？我们的离心机纸板包装含有约 50%的回收材料。请通过收集冰箱纸板包装材料并将其防止在适当的回收容器中，来支持回收有价值原材料的全球可持续发展倡议。对于LD-PE和泡沫制成的塑料防尘罩，我们建议选择可以回收PE材料的专门回收合作伙伴料。建议联系您当地的废物管理公司或设施管理团队，了解适合贵公司的可用回收方案。

仪器处置
我们的离心机可以使用多年。但如果需要更换，我们建议您根据当地要求，妥善处置此类仪器。我们强烈建议您在具有主动制冷仪器方面具有丰富经验的经认证本地回收合作伙伴。“本地”处理可减少运输影响。由于制冷剂需要以安全、可持续的方式进行移除和回收，建议采用“认证”方式对冷却离心机进行处置。

消毒
该设备用于实验室和/或用于处理生物样品。请记住对需要处理的设备进行充分去污。查看当地要求。有关更多信息，请联系当地的生物安全官员和/或废物管理官员。检查您当地的回收合作伙伴是否有特殊说明和/或文件要求。您也可以使用Eppendorf去污表格作为指导。

阅读更少

规格	5920 R

最大 RCF	21194 × g
最大 RCF，带固定角转	21194 × g
最大 RCF，带水平转子	4791 × g
最大 RCF，带工作板转子	3486 × g
速度	100 – 13,700 rpm
产品类型	离心机
可用转子	9
最大容量	4 × 1,000 mL / 4 × 7 MTP
加速/减速档	10/10
程序数量	99 个应用程序(5个程序按键)
定时器	10 秒至 99 小时 59 分钟, 可连续离心，具备 short-spin 瞬时离心功能
噪音水平	<55 dB(A)
电源	230 V, 50 – 60 Hz
最大能耗	1650 W
尺寸（长x宽x高）	74 × 71 × 40 cm / 29.2 × 27.8 × 15.9 in
占地面积（带/不带前面板的尺寸，WxD）	74 × 67 cm
产品重量	139 kg / 306 lb
开盖高度	94 cm / 37 in
冷冻型	冷冻型
适用锥形管、工作板和瓶子的通用适配器	是
适用 MTP、PCR 或 DWP 的工作板转子选项	是
适用高转速的固定角转	是
温度范围	-11 °C 至 +40 °C

最大容量
锥形管	10815mL5250 ×  / mL
板	28 ×  MTP / 8 ×  DWP
Blood collection tubes	196 × 13 毫米 / 148 ×  16毫米

噪音水平
转子 FA-6x50	<60 dB(A)
S-4x 通用-大型水平转子	<55 dB(A)