What is the meaning of the red knob on the rotor lid?

A fixed-angle rotor with a red knob on the rotor lid indicates aerosol-tightness.

How does the Centrifuge 58xx and 59xx recognize that a different rotor is in use?

A new rotor will automatically be recognized as soon as it starts spinning. Recognition of the rotor can be performed manually by making it spin counterclockwise (roughly 200 rpm necessary), or by turning the Centrifuge on. As soon as the rotor starts spinning it will be recognized. In case the indicated max. speed of the previous rotor was higher, speed must be confirmed in a display pop-up. The user has the choice between the rotor-specific max. speed or a lower speed, that can be set directly.

How are the Centrifuges 5804/ 5804 R and 5810/ 5810 R protected during transport? Is there a transport protection device?

No, the Centrifuges 5804/ 5804 R and 5810/ 5810 R do not come with a transport protection device. They are packaged in polystyrene for protection. Because the rotor is not in the centrifuge during transport, there are no movable parts to make a transport protection device necessary.

Can I still change the settings when I have started the Centrifuges 5804/ 5804 R or 5810/ 5810 R?

Yes, the speed, the time and the temperature can be changed even when the centrifuge is running. To do this, please press the SPEED, TIME or TEMP key and change the values by pressing the arrow keys.

How can I recognize in the display of the Centrifuges 5804/ 5804 R or 5810/ 5810 R whether I have selected "rpm" or "rcf"?

For rcf, a "*" is displayed in front of the value. rpm is not indicated by a symbol.

What is the minimum rotational speed (rpm) of the Centrifuge 5804/ 5804 R or 5810/ 5810 R, and in which increments can it be increased?

The minimum rotational speed is 200 rpm, irrespective of the inserted rotor. The minimum rotational speed can be increased in increments of 10 rpm up to 5,000 rpm and then in increments of 100 rpm.

Is it possible to adjust the Centrifuge 5804/ 5804 R or 5810/ 5810 R so that it stops on its own, meaning without active braking?

Yes. Free deceleration of your centrifuge can be achieved by setting the braking level to 0.

"Clean rotor" appears on the display of my centrifuge. Do I now need to remove the rotor from the centrifuge, and, if yes, how?

This display appears every 200 centrifugation runs. For cleaning the rotor and the rotor chamber, the rotor must first be removed from the centrifuge. To do this, loosen the rotor nut by turning it counter-clockwise with the supplied rotor key. Please clean the rotor and rotor chamber only with mild cleaning agents (e.g. 70% alcohol solutions or commercially available alcoholic disinfectants).

The Centrifuges 5804/ 5804 R and 5810/ 5810 R are programmable. What is saved during the programming?

All data is saved that can also be entered manually, such as rotational speed or RCF, maximum radius, run time, acceleration and braking ramps, "at set rpm", temperature.

Is it possible to centrifuge 50 mL and 15 mL tubes together in one rotor?

Yes, it is possible, provided that the rotor is loaded symmetrically. This means that the 50 mL tubes and the 15 mL tubes are positioned opposite one another and are positioned symmetrically. Please use the appropriate adapters for the tubes.

Does Eppendorf offer a rotor for PCR strips for Centrifuges 5804/ 5804 R or 5810/ 5810 R?

The PCR strip rotor F-45-48-PCR is available under the order number 5804 735.005. It can centrifuge up to 6 x 8-well strips at 12,000 rpm / 15,350 x g.

In which rotor is it possible to centrifuge 50 mL DIN glass tubes?

50 mL DIN glass tubes (diameter 34 mm, length 100 mm) can be centrifuged in the adapter for 50 - 75 ml tubes (order number 5804 760.000) of the swing-bucket rotor A-4-44 or adapter 5810 760.003 of swing-bucket rotor A-4-62 . Depending on the length of the tube, the uppermost module of the adapter can be removed for centrifugation of 50 mL DIN glass tubes.

How big is the g-force difference between the lowest and the highest plate when loading a bucket of the rotor A-2-DWP with four microplates?

The following g-forces are reached with the rotor A-2-DWP: Lowest plate: 2,250 x g Highest plate: 1,825 x g

Is there an adapter to spin microscope slides in centrifuge 5804 / 5804 R / 5810 / 5810 R?

Up to 12 slides can be inserted into the CombiSlide adapter 5825706005 and then centrifuged in the swing out rotors of Centrifuge 5804/ 5804 R or 5810/ 5810 R.

Do the adapters for the 0.2/ 0.4/ 0.5/ 0.6 mL tubes, which are designed for the rotors F-45-30-11 and FA-45-30-11, also fit into the rotor F-34-6-38 with the adapter 5804 770.005 (for 1.5/ 2.0 mL tubes)?

Yes, these adapters can also be used in the rotor F-34-6-38 with the adapter 5804770005.

There are 2 different adapters for the 15 mL tubes. One for tubes with round bottoms and one with a conical bottom for conical tubes. Can I not use one adapter for both tubes?

No, unfortunately this is not possible. In order to be able to reach the high rotational speeds, the adapters must be form-locking.

Do the adapters for the 0.5 mL tubes fit into the rack for 1.5/ 2.0 mL tubes of the rotor T-60-11 for centrifuge 58xx?

Yes, the adapters can be inserted into the rotor for centrifugation of 0.5 mL tubes.

The writing on one rotor of the Centrifuge 5804/ 5804 R or 5810/ 5810 R says, for example, "6x125g". Does this mean that the centrifuge only enables an RCF of 125 or that it can only be loaded with a maximum of 6 times 125 gram?

This label states that the rotor can be loaded with a maximum of 6 x 125 gram. "g" is the official abbreviation for "gram". Where "g" is used as an abbreviation of "g-force", the number and "x g" are used. Example: 10,800 x g.

How many times can aluminum rotors be autoclaved?

Aluminum rotors can be autoclaved up to 100 times for 20 minutes at 121 °C.

Does the Centrifuge 58xx R has an energy saving function?

Yes, the ECO shut-off automatically switchs off the compressor after 8 hours of non-use. The device has a stand-by button.

Is it possible to switch off the brakes of Centrifuges 5804/ 5804 R or 5810/ 5810 R, e.g. when centrifuging a gradient?

Yes. Free deceleration of your centrifuge can be achieved by setting the braking level to 0.

Can the new rotor generation be used with older Centrifuges without retrofitting?

Yes, you can use the new rotors from software version 8.4 onwards. From versionb 7.0 on a software update to version 8.4 can easily be performed by trained service technician. In case of older software versions, the complete PCB control/frequency converter must be replaced. You can see the current software version of your centrifuge briefly on the display after switching it on.

How does the Centrifuge recognize that a different rotor is in use?

A new rotor automatically will be recognized as soon as it starts moving. Moving and recognition of the rotor can be performed manually by making it spin counterclockwise (roughly 200 rpm necessary), or by turning the Centrifuge on. As soon as the rotor starts spinning it will be recognized. When indicated, the Centrifuge shuts down under specification of max. speed in case the indicated max. speed of the previous rotor was higher. In this case the Centrifuge must be restarted.

For which centrifuge can we use our mobile tables 5921 000 010 and 5921 000 012?

The mobile tables can be used for centrifuges 59xx as well as 58xx.

text.skipToContent text.skipToNavigation

CN | CNY

未找到任何结果

搜索建议

产品系列

Show all Product Families ()

文章

Show all Articles ()

内容

Show all Content ()

Centrifuge 5804/ 5804 R

Centrifuge Rotor A-2-DWP with buckets for Centrifuge 5804/5804 R

Centrifuge Rotor FA–45–6–30 with QuickLock® lid mechanism

Eppendorf centrifuge rotor Rotor F-34-6-38 for Centrifuge 5804/5804 R

Eppendorf Rotor FA-45-48-11 with Eppendorf QuickLock® technology

通用实验室产品版本

IVD 产品版本

产品信息

高速台式离心机Centrifuge 5804/5804 R适用于中等通量分子生物学应用。它可以轻松处理 0.2 mL 到 250 mL 的所有常见试管类型和工作板，并且提供一系列转子和适配器，具备多样卓越功能。

显示更多产品信息

您可以在以下网址找到其他下载资料本页面底部

产品 (1)

组合套装 (2)

Services (27)

转子 (14)

附件 (2)

1 产品

Centrifuge 5804 R

按键式, 冷冻型, 不含转子
230 V/50 – 60 Hz (CN)

更多产品详情...

目录编号 5805000097

显示更多产品

已添加到您的购物车

产品信息

技术数据

特征

Centrifuge 5804/5804 R，这款台式离心机以其可靠品质而闻名，为您提供更具成本效益的解决方案，适用于转速高达 20913 x g（14000 rpm）的中等通量应用。提供一系列转子和适配器，具备多样卓越功能，适用于 0.2 mL 至 250 mL 离心管和试剂瓶，以及 MTP、PCR 和深孔板。
水平转子和适配器适用于 0.2 mL 至 250 mL 离心管和试剂瓶，固定角转适用于 0.2 mL 至 85 mL 容器。工作板转子可离心所有常见类型的多孔板，如 PCR、细胞培养或深孔板。

S–4–72转子

使用Eppendorf水平离心转子Rotor S–4–72，适用于中等通量分子应用。提供高达 3234 x g（4200 rpm）的速度和一系列适配器，可以轻松处理 0.2 mL 到 250 mL 的所有常见试管类型。采用符合空气动力学的圆形吊篮设计，相较于 Rotor A–4–62 ，可节省高达 48 % 的能源。吊篮和适配器可进行高压灭菌处理。

高速离心转子

带有Eppendorf QuickLock^®转子盖的Eppendorf Rotor FA–45–6–30转子（6 x 50 mL）可用于最高速度为20,130 x g (12,100 rpm)的Centrifuge 5810 R高速离心机；用于5804、5804 R、5810离心机时，该转子的最高速度为16,639 x g (11,000 rpm)。此种转子采用气密性设计，可以安全离心危险样品，并且使用Eppendorf QuickLock转子盖快速锁定技术。转子重量仅为 3.2 kg，易于操作，简化日常工作流程。45° 钻孔角度设计有助于减少管壁的颗粒残留。

您是否拥有 Eppendorf 产品？已经注册了？

您知道吗，每款 Eppendorf 注册产品均可在我们的奖励商店兑换以下?
• 100 点 epPoints^®
• 当您注册离心机、振动试验机、CO2 培养箱或循环仪时，可享受额外 3 个月的保修服务
• 每款注册产品均可参加一次 Eppendorf 独家抽奖活动
• 在 Eppendorf 网站上分享您的个人产品故事

操作非常简单！您可以 -
1. 下载 Eppendor f应用程序，扫描并注册，或者
2. 访问我们的网页，登录 myEppendorf 帐户并输入产品序列号
更多信息敬请访问：www.eppendorf.com/productregistration

废弃产品

包装处置
离心机包装包含不同材料，包括木制托盘、纸板、塑料防尘罩和一些泡沫部件。材料的回收变得越来越重要：您知道欧洲几乎回收所有的纸板材料吗？我们的离心机纸板包装含有约 50%的回收材料。请通过收集冰箱纸板包装材料并将其防止在适当的回收容器中，来支持回收有价值原材料的全球可持续发展倡议。对于LD-PE和泡沫制成的塑料防尘罩，我们建议选择可以回收PE材料的专门回收合作伙伴料。建议联系您当地的废物管理公司或设施管理团队，了解适合贵公司的可用回收方案。

仪器处置
我们的离心机可以使用多年。但如果需要更换，我们建议您根据当地要求，妥善处置此类仪器。我们强烈建议您在具有主动制冷仪器方面具有丰富经验的经认证本地回收合作伙伴。“本地”处理可减少运输影响。由于制冷剂需要以安全、可持续的方式进行移除和回收，建议采用“认证”方式对冷却离心机进行处置。

消毒
该设备用于实验室和/或用于处理生物样品。请记住对需要处理的设备进行充分去污。查看当地要求。有关更多信息，请联系当地的生物安全官员和/或废物管理官员。检查您当地的回收合作伙伴是否有特殊说明和/或文件要求。您也可以使用Eppendorf去污表格作为指导。"

阅读更少

规格	5804 R

最大 RCF	20913 × g
最大 RCF，带固定角转	20913 × g
最大 RCF，带水平转子	4500 × g
最大 RCF，带工作板转子	2250 × g
速度	200 – 14,000 rpm (10 rpm 步进)
产品类型	离心机
可用转子	12
最大容量	4 × 250 mL/ 2 × 5 MTP
加速/减速档	10/10
程序数量	35个用户自定义程序
定时器	1 分钟至99 分钟, 可连续离心，有瞬时离心功能
噪音水平	< 58 dB(A)
电源	230 V, 50 – 60 Hz
最大能耗	1650 W
尺寸（长x宽x高）	63.4 × 55.0 × 34.2 cm / 25.0 × 21.7 × 13.5 in
占地面积（带/不带前面板的尺寸，WxD）	64 × 50厘米 /  25 × 21.7英寸
产品重量	80 kg / 176.4 lb
开盖高度	74 cm / 29 in
冷冻型	冷冻型
温度范围	-9 °C 至 40 °C

最大容量
锥形管	40 × 15 mL/ 16 × 50 mL
板	10 × MTP/ 2 × DWP
Blood collection tubes	56 × 13 mm/ 52 × 16 mm

噪音水平
FA-45-6-30 气密性固定角转 (6×50 mL)	<54 dB(A)
S-4-104 水平转子(4×750 mL)	–
S-4-72 水平转子 (4×250 mL)	<58 dB(A)