- 6 SLAS/ANSI deck positions and automatic tool exchange for 3 tools and gripper
- Volume range from 0.2 to 1,000 µL (depending on dispensing tools used)
- Compatible with tubes from 0.2 mL to 50 mL and micro and PCR plates up to 384 wells
- Optical sensor for detecting liquids, labware, tips
- MultiCon PC controller with simulation, network and software upgrade options
- Intuitive drag-and-drop-based software
- Optional UV lamp and air filter system for decontamination and clean air conditions
- Optional thermal module for heating or cooling (0 – 110 °C) of samples or reagents
- Integrated LEDs for deck illumination and visual feedback of system status like idle, run in progress or run finished
- Optional software extensions for handling barcodes and supporting regulated environments complaint to e.g. 21 CFR part 11
MENU
TH | THB
TH | THB
-
- Benchtop Centrifuges
- Floor-Standing Centrifuges
- Refrigerated Centrifuges
- Microcentrifuges
- Multipurpose Centrifuges
- High-Speed Centrifuges
- Ultracentrifuges
- Concentrator
- High-Speed and Ultracentrifuge Consumables
- Centrifuge Tubes
- Centrifuge Plates
- Device Management Software
- Sample and Information Management
You are about to leave this site.
Please be aware that your current cart is not saved yet and cannot be restored on the new site nor when you come back. If you want to save your cart please login in into your account.
No results found
Search Suggestions
epMotion® 5073l
Product Information
- MultiCon PC, completely contained housing, epBlue software, keyboard, mouse, system for solid and liquid waste
- 100 – 240 V/50 – 60 Hz, 0.2 µL – 1 mL, (depending on dispensing tools)

You will find additional download material at the bottom of this page
Technical Data
Features
Technical Data
Specifications | epMotion® 5073l |
---|
Eppendorf ThermoMixer® |
|
Speed | − |
Time range setting | − |
Max. load | − |
Temperature range | − |
Heating rate | − |
Cooling rate above RT | − |
Cooling rate below RT | − |
Thermal module |
|
Max. number of modules | 1 |
Time range setting | 1 – 120 min |
Temperature range | 0 °C – 110 °C |
Heating rate | 9 °C/min |
Cooling rate | 4 °C/min |
Volume range | 0.2 µL – 1 mL |
Operating mode | automation |
Autoclavable | yes (tools) |
Power supply | 100 – 240 V, 50 – 60 Hz |
Consumables | epT.I.P.S. motion tips as racks or reload |
Max. power consumption | 400 W |
Dimensions (W × D × H) | 68 × 62 × 81 cm / 27 × 25 × 32 in |
Product weight | 86 kg / 190 lb |
SLAS/ANSI positions | 6 |