PL | PLN
No results found
Search Suggestions
Multipette® E3x
The Multipette E3x multi-dispenser pipette comes with an assortment pack of fitting Combitips® advanced tips
Multipette® E3/E3x multi-dispensers are ideal to quickly fill plates
Lightweight and ergonomic, the Multipette® E3 or E3x electronic multi-dispenser pipette is the ideal solution for filling plates or large series of tubes.
The well-organized display of the Multipette® E3/E3x electronic multi-dispenser pipette from Eppendorf
Multipette E3x
The range of Combitips® advanced dispenser tips offer a wide spectrum of possibilities
Końcówki do pipet Combitips® advanced nadają się idealnie do pracy z użyciem serii urządzeń Multipette® firmy Eppendorf i są dostępne w 9 rozmiarach (od 0,1 mL do 50 mL).
Pipette Holder 2 with a Multipette® E3x multi-dispenser from Eppendorf
The Multipette® E3/E3x electronic multi-dispenser pipette can be easily mounted on a wall.
The Pipette Carousel 2 holding Eppendorf Xplorer®, Multipette® E3x and Eppendorf Research® plus pipettes
The Eppendorf Pipette Holder System stores all current Eppendorf pipettes (including the Multipette®) and most of their predecessors.
Multipette® E3x Electronic Multi-Dispenser Held By Scientist (Product Close-Up)
With low weight, an ideal hand balance and easy-to-reach operating buttons, the Multipette® E3x electronic multi-dispenser is highly ergonomic
Female scientist using a Multipette® E3x multi-dispenser to quickly fill a microplate
The Multipette® E3(x) electronic positive displacement dispenser pipettes are ideal for stress-free, long series repetitive dispensing due to their lightweight, ergonomic design, and easy, motor driven action which reduces fatigue and the risk of repetitive strain injuries
Fill microplates with ease with the Multipette® E3x electronic multi-dispenser from Eppendorf
While the Multipette® E3 already meets many application needs with its three main operating modes Dispensing, Automatic Dispensing and Pipetting, the Multipette E3x comes with four additional modes: Sequential Dispensing, Aspiration, Aspiration/Dispensing, and Titration
Easily update the software of your Multipette® E3(x) with the Eppendorf Pipette Software Update Tool
Multipette® E3x connected to a laptop to run a software update
Using the Multipette® E3x pipette in the lab
Simply fill the tip once and accurately dispense up to 100 times without a refill using the Multipette® E3/E3x electronic multi-dispenser pipettes
Product Information
- 1-channel
- 1 µL – 50 mL
- incl. charging cable and Combitips® advanced assortment pack (1 tip of each size)
-
Learn more about sustainability & ergonomics at Eppendorf
-
Easily update the firmware of your electronic pipette with our Pipette Software Update Tool
-
Combitips® Selection Guide
You will find additional download material at the bottom of this page
Pipette Tips (31)
Services (11)
Accessories (7)
Spare Parts (3)
|
|
|
|
|
|
|
|
|
|
Added to Your Cart
Technical Data
Features
| Specifications | Multipette® E3x - 4987000029 |
|---|
| ACT label | yes |
| Product type | Dispensers |
| Pipetting type | Positive displacement system |
| Number of channels | 1-channel |
| Volume range | 1 µL – 50 mL |
| Operating mode | electronic |
| Random measurement error | see Combitips advanced |
| Systematic measurement error | see Combitips advanced |
| Display languages | 9 languages |
| Autoclavable | no |
| Power supply | 100 – 240 V ±10 %, 50 – 60 Hz |
| Battery type | Rechargeable li-ion |
| Consumables | Combitips® advanced, ViscoTip® |
| Open system (third party consumables) | no |
| Delivery content | Multi-Dispenser, Power supply with plug adapters, Operating manual, Short instructions, Combitips® advanced assortment pack (1 tip of each size), ViscoTip |
