How is the Centrifuge 59xx protected during transport? Is there a transport protection device?

No, the Centrifuge 59xx does not come with a transport protection device. It is packaged in polystyrene for protection. Because the rotor is not in the centrifuge during transport, there are no movable parts to make a transport protection device necessary.

Can I still change the settings when I have started the Centrifuge 5920 R/ 5910 R?

Yes, the speed, the time and the temperature can be changed even when the centrifuge is running. To do this, please press the arrow keys below SPEED, TIME or TEMP values in the display. To change the radius or acceleration and breaking ramps please use the enter/menu key and the menu arrow keys to proceed.

How can I recognize in the display of the Centrifuge 59xx whether I have selected “RPM" or “RCF"?

Whether you have selected RPM or RCF, is displayed next to the RPM and RCF value respectively in the display.

What is the minimum rotational speed (rpm) of the Centrifuge 59xx, and in which increments can it be increased?

The minimum rotational speed is 10 rpm (1 x g), irrespective of the inserted rotor. The minimum rotational speed can be increased in increments of 10 rpm (10 x g) up to 5,000 rpm (3,000 x g). 5,000 – 14,000 rpm (3,000 – 22,132 x g) can be set in increments of 100 rpm (100 x g).

Is it possible to adjust the Centrifuge 59xx in a way that it stops on its own, meaning without active braking?

Yes. Free deceleration of your centrifuge can be achieved by setting the braking level to 0.

Centrifuge 59xx is programmable. What is saved during the programming?

All manually entered data such as rotational speed or RCF, maximum radius, run time, acceleration and braking ramps, "at set rpm", temperature can be saved. Further, to delay the start for incubation reasons e.g., a timer can be set to up to 60 min.

Does Eppendorf offer a rotor for PCR strips for Centrifuge 59xx?

A PCR strip rotor is not available. Adapters (5425 715.005) for single PCR tubes are available for 1.5/2 mL microtube rotors.

Is it possible to spin 50 mL and 15 mL tubes together in one rotor?

Yes, it is possible, provided that the rotor is loaded symmetrically. This means that the 50 mL tubes and the 15 mL tubes are positioned opposite one another and are positioned symmetrically. Please use the appropriate adapters for the tubes.

How big is the g-force difference between the lowest and the highest plate when loading a Plate/Tube-bucket of rotor S-4x1000 with 7 microplates?

The following g-forces are reached with the rotor S-4x1000: Highest plate: 3,000 x g (radius: 196 mm); Lowest plate: 1,948 x g (radius: 127.3 mm).

How big is the g-force difference between the lowest and the highest plate when loading a plate bucket of the rotor S-4x750 with 4 microplates?

The following g-forces are reached with the rotor S-4x750: Highest plate: 4.035 x g (radius: 163.5 mm); Lowest plate: 3,087 x g (radius: 129 mm).

Is there an adapter for slides?

Up to 12 slides can be inserted into the CombiSlide adapter (5825 706.005) and then centrifuged in the appropriate swing-bucket rotors (plate bucket or universal bucket with plate carrier) of Centrifuge 59xx.

Can rotor S-4x750 be loaded with a mixture of round tube and plate buckets ?

Yes, this so-called mixed loading is possible. Please ensure that the same type of buckets are always used in opposing positions.

Can rotor S-4x1000 be loaded with a combination of round tube, plate and high capaciy-buckets?

Yes, this so-called mixed loading is possible. Please ensure that the same type of buckets are always used in opposing positions.

There are 2 different adapters for 15 mL tubes. One for tubes with round bottom and one for conical tubes. Why can’t I use one adapter for both tubes?

No, unfortunately this is not possible. In order to be able to reach the high rotational speeds, the adapters must be form-locking.

Can the rotors of Centrifuge 5810/ R and 5804/ R be used for Centrifuges of the 59xx family?

No, this is not possible. Please do only use rotors which are labeled with the Centrifuge name 5920 R or 59XX.

The writing on one rotor says, for example, "6 x 125 g". Does this mean that the centrifuge only allows for a RCF of 125 or that it can only be loaded with a maximum of 6 times 125 gram?

This label states that the rotor can be loaded with a maximum of 6 x 125 gram. "g" is the official abbreviation for "gram". Where "g" is used as an abbreviation of "g-force", the number and "x g" are used. Example: 10,800 x g.

Can rotors, buckets and adapter be autoclaved?

Yes, fixed-angle rotors, rotor lids, buckets, bucket-caps and adapter can be autoclaved for 20 minutes at 121 °C. The 59xx swing-bucket rotor crosses can not be autoclaved. After 50 autoclaving cycles, we strongly recommend to exchange aerosol-tight caps and sealings in QuickLock-rotors.

"Does the Centrifuge 59xx have an energy saving function?“

Yes, the ECO shut-off automatically switches off the compressor after 8 hours of non-use (standard setting) or if desired, after 1, 2 or 4 hours. The device has a stand-by button. For example, centrifuge 5920 R has an ultra low power consumption of only <2 W in stand-by mode. Further, the extraordinary high centrifuge efficiency limits the max. power consumption to 1,300 W.

What is the meaning of the red knob on the rotor lid?

A fixed-angle rotor with a red knob on the rotor lid indicates aerosol-tightness.

How does the Centrifuge 58xx and 59xx recognize that a different rotor is in use?

A new rotor will automatically be recognized as soon as it starts spinning. Recognition of the rotor can be performed manually by making it spin counterclockwise (roughly 200 rpm necessary), or by turning the Centrifuge on. As soon as the rotor starts spinning it will be recognized. In case the indicated max. speed of the previous rotor was higher, speed must be confirmed in a display pop-up. The user has the choice between the rotor-specific max. speed or a lower speed, that can be set directly.

What is to be considered when using rotor S-4x1000 and 1-liter bottles?

Each position of the rotor must be equipped with a bucket. Centrifugation with only 2 x 1-Liter bottles is possible. But we recommend to load the 4 positions in the rotor equally to reduce vibration and noise.

What is the advantage of FastTemp?

At rotor standstill (continuous cooling) the cooling process is slower than while centrifugation. With FastTemp you directly start cooling without samples and with temperature- and rotor-specific centrifugation speed.

What is “FastTemp pro”?

With FastTemp pro you can program your 59xx to start the FastTemp run at a defined point of time, once or regularly.

What do I have to consider when using FastTemp function with aerosol-tight buckets?

Cooling of buckets with aerosol-tight caps takes longer and may lead to underpressure in the buckets. Don´t use aerosol-tight caps while FastTemp is running.

Which possibilities do I have for round bottom tubes longer than 120 mm?

You can use rotor S-4x1000 with round buckets for 13 and 16 mm tubes of 121 and 125 mm height respectively.

Can I perform a software upgrade on my own?

No. Software upgrades on 59xx centrifuges can easily be performed via USB port by a trained service technician. He ensures that the technical parameters, such as imbalance tolerance, are correctly adapted to the new software version.

What is the radius correction for and when do I need it?

The conversion from speed to g-force is based on the biggest radius of the rotor. If you are using an adapter for tubes, you can adjust the value for the radius manually. You can find the value for the radius of an adapter in a rotor in the technical data of the rotor. The adjustment of the radius is important when exact reproduction of protocols is necessary to ensure accurate results.

What does “at set rpm” mean?

With “at set rpm” you can specify when time counting should begin, immediately or when 95 % of the speed has been reached.

Do you have adapters for conical bottles 175-250 or 500 mL?

Yes. 175-250 mL conical bottles can be used with Eppendorf adapters with flat bottom. For this adapter you will further need a special conical form insert from the tube supplier, which has to be placed in the Eppendorf adapter. For 500 mL conical Corning tubes Eppendorf has a special adapter for which no extra insert is needed.

What do I have to consider when loading buckets incompletely?

Buckets must be loaded symmetrically in a way that the load on the pivots is even. This will be reached by concentrating the load around the balance point of the bucket. Ensure that buckets swing freely by carrying out a manual spinning test. The buckets should swing out correctly without touching the rotor cross or the rotor chamber.

Can we use our rolling cabinet 5821 020 010 for the 5920R?

The rolling cabinet 5821 020 010 is too small for the 5920R. Our Mobile Tables 5921 000 010 and 5921 000 012 are an alternative.

For which centrifuge can we use our mobile tables 5921 000 010 and 5921 000 012?

The mobile tables can be used for centrifuges 59xx as well as 58xx.

text.skipToContent text.skipToNavigation

PL | PLN

No results found

Search Suggestions

Product Families

Show all Product Families ()

Article

Show all Articles ()

Content

Show all Content ()

Centrifuge 5920 R - Large Centrifuge

Eppendorf Rotor FA-6x250 with adapters for Centrifuge 5920 R

Eppendorf Rotor FA-6x250 with 250 mL bottles for Centrifuge 5920 R

Eppendorf Rotor S-4x1000 for large centrifuges

Centrifuge 5920 R Rotor S-4x1000 and S-4xUniversal-Large

Eppendorf Rotor S-4xUniversal-Large for large centrifuges

Centrifuge 5920 R Rotor S-4x1000 with round buckets

Eppendorf QuickLock_REG_ caps for benchtop centrifuge Centrifuge 5810/5810 R

Universal centrifuge rotor adapters for conical tubes, plates and bottles

General Lab Product Version

Product Information

Centrifuge 5920 R: Large Capacity and High Performance

Centrifuge 5920 R is a large bench top refrigerated centrifuge with exceptional performance and high capacity, making it a superior choice for high-throughput applications.

Show more Product Information

Good-design

Scientists choice Awards 2017

Request a demo

You will find additional download material at the bottom of this page

Products (1)

Sets & Bundles (5)

Services (16)

Rotors (9)

Accessories (2)

1 Products

Centrifuge 5920 R (EU-IVD)

keypad, refrigerated, without rotor
230 V/50 – 60 Hz (EU)

More Product Details ...

Quantity

Check stock

Catalog no. 5948000018

Net Price

zł 58,660.00

Gross Price

zł 63,352.80

Inquire

Show more Products

Added to Your Cart

Product Information

Technical Data

Features

Optimize Your Lab with the Centrifuge 5920 R

The large centrifuge machine combines extraordinary capacity with a compact and ergonomic product design. It has similar dimensions to competing refrigerated 3 L models yet it is capable of offering superior capacity of up to 4 x 1,000 mL or 52 x 50 mL tubes. Streamline high-throughput centrifugation and make everyday work more enjoyable.

Large capacity centrifuges for high-throughput applications

The Centrifuge 5920 R is designed to meet the demands of high-throughput applications with its large volume centrifuge capabilities. Its ergonomic design and advanced features make it a valuable addition to any lab requiring a large capacity centrifuge.
Optimize your lab’s efficiency and performance with the Centrifuge 5920 R, the ultimate large capacity centrifuge for high-throughput applications.

Large capacity centrifuge with universal buckets

Save valuable time, money and space with universal buckets for both tubes and plates. With Rotor S-4xUniversal-Large you can spin tubes, plates and bottles with only a change the adapter, not the rotor bucket. With the Centrifuge 5920 R we developed large capacity centrifuges where there is no need to exchange buckets, use separate bucket places or find space to store different buckets.

Big centrifuge with superior 4 L capacity

Centrifuge 5920 R accommodates standard 1 L Nalgene bottles setting a new standard in the bench top centrifuge segment.The higher 4 x 1000 mL capacity allows you to process a higher volume without needing more runs, making it an ideal large volume centrifuge.

Advanced operating system for large volume centrifuge

The Centrifuge 5920 R combines outstanding functionality with an advanced operating system. It has a menu-driven, multilingual operation menu with large backlit display that allows you can save up to 99 user-defined programs and 5 program keys for easy access to routine programs. The FastTemp pro function is available for fast automated pre-cooling using a pre-programmable time and date.

Proud owner of an Eppendorf product? Already registered?

Did you know that if you register your Eppendorf Centrifuge 5920 R with us you will get the following?
• 100 epPoints^® (for each product you register) to redeem in our rewards shop
• Additional 3 months warranty when you register a centrifuge, shaker, CO₂ incubator or cycler
• Entry in an exclusive Eppendorf prize draw (for each product you register)
• Get your personal product story to be posted on the Eppendorf website

Getting started is super easy! Either -
1. Download the Eppendorf App, scan and register OR
2. Visit our webpage, log onto your myEppendorf account and enter the product serial number
More information: www.eppendorf.link/product-registration

End-of-life

Disposal of packaging
The packaging of the Eppendorf Centrifuge 5920 R contains different materials, this can include a wooden pallet, cardboard, a plastic dust cover, and some foam parts. Recycling of materials becomes more and more important every day: Are you aware that nearly all cardboard material is recycled in Europe? Our centrifuge packaging cardboard material consists of ca. 50% recycling material. Please support the global sustainability initiative of recycling valuable raw material by also collecting the freezer cardboard packaging material and disposing of it in the appropriate collection container at your organization. In respect to the plastic dust cover made of LD-PE and the foam parts, we recommend to select a dedicated recycling partner where PE material can be recycled. We suggest you contact your local waste hauler or facility management team to understand the available recycling options for your organization.

Disposal of instrument
Our Eppendorf Eppendorf Centrifuge 5920 R lasts for many years, but if it needs to be replaced, we kindly ask you to fulfill local requirements for disposal of these instruments. We strongly recommend a certified local recycling partner with experience in instruments with active cooling. Keeping it “local“ reduces the impact of transportation, and the "certified" aspect is recommended due to the safe and sustainable removal and recycling of the cooling liquids if it is a refrigerated centrifuge.

Decontamination
This piece of equipment was used in a laboratory and/ or was used to handle biological samples. Please keep in mind to adequately decontaminate the equipment which needs to be disposed. Check local requirements. For more information, get in contact with your local biosafety officer and/ or waste officer. Check if your local recycling partner has special instructions and/ or documentation requirements. You may also use the Eppendorf decontamination form sheet as guidance.

Read Less

Specifications	5920 R

Max. RCF	21194 × g
Max. RCF with fixed-angle rotor	21194 × g
Max. RCF with swing-bucket rotor	4791 × g
Max. RCF with plate rotor	3486 × g
Speed	100 – 13,700 rpm
Product type	Centrifuges
Rotors available	9
Max. capacity	4 × 1,000 mL/ 4 × 7 MTP
Acceleration/braking ramps	10/10
Number of programs	99 (5 program keys)
Timer	10 s to 99 h 59 min, with continuous run function, short-spin
Noise level	<55 dB(A)
Power supply	230 V, 50 – 60 Hz
Max. power consumption	1650 W
Dimensions (W × D × H)	74 × 71 × 40 cm / 29,2 × 27,8 × 15,9 in
Footprint (dimensions w/o front panel, WxD)	74 × 67 cm
Product weight	139 kg / 306 lb
Height (with open lid)	94 cm / 37 in
Cooling	refrigerated
Universal adapters for conical tubes, plates and bottles	yes
Plate rotor options for MTP, PCR or DWP	yes
Fixed-angle rotors for high-speed applications	yes
Temperature range	-11 °C to +40 °C

Max. capacity
Conical tubes	108 × 15 mL/ 52 × 50 mL
Plates	28 × MTP/ 8 × DWP
Blood collection tubes	196 × 13 mm/ 148 × 16 mm

Noise level
Rotor FA-6x50	<60 dB(A)
Rotor S-4xUniversal-Large	<55 dB(A)

Downloads: Centrifuge 5920 R

Selection Guide

Centrifuge Family Overview (IVD)

Overview of all Centrifuges: Capacity and Technical Data

PDF 2.2MB

English

Flyer

Increase Your Input - Expand Your Output

New high-capacity fixed-angle Rotor FA-6x250 or up to 6 x 250 mL bottles

PDF .4MB

English

Brochure

The Next Benchmark (IVD)

Eppendorf Centrifuge 5920 R

PDF 18.1MB

English

You might also consider

Eppendorf Deepwell Plates

High-quality, superior performance Eppendorf Deepwell Plates.

Twin.tec PCR plates offer ideal features for reproducible PCR

Eppendorf twin.tec^® PCR Plates LoBind^®

Special manufacturing technology combine the high quality and benefits of twin.tec PCR plate with low binding to maximize yield of target molecules. Automation friendly. Different formats available.

Transparent Conical tubes, 15 mL and 50 mL

Eppendorf Conical Tubes 15 mL and 50 mL

High quality conical tubes 15 mL and 50 mL

Evenly shaped PCR plates for reliable heat transfer

Eppendorf twin.tec^® PCR Plates

High quality PCR plates with twin-technology. Thin-walled PP wells with a rigid PC frame allow for optimal heat transfer without warping - very automation friendly. Different formats available.

Centrifuge 5920 R - Large Centrifuge

Do I need IVD?

Product Information

Centrifuge 5920 R: Large Capacity and High Performance

Product Information

Optimize Your Lab with the Centrifuge 5920 R

Large capacity centrifuges for high-throughput applications

Large capacity centrifuge with universal buckets

Big centrifuge with superior 4 L capacity

Advanced operating system for large volume centrifuge