What is the meaning of the red knob on the rotor lid?

A fixed-angle rotor with a red knob on the rotor lid indicates aerosol-tightness.

How does the Centrifuge 58xx and 59xx recognize that a different rotor is in use?

A new rotor will automatically be recognized as soon as it starts spinning. Recognition of the rotor can be performed manually by making it spin counterclockwise (roughly 200 rpm necessary), or by turning the Centrifuge on. As soon as the rotor starts spinning it will be recognized. In case the indicated max. speed of the previous rotor was higher, speed must be confirmed in a display pop-up. The user has the choice between the rotor-specific max. speed or a lower speed, that can be set directly.

How are the Centrifuges 5804/ 5804 R and 5810/ 5810 R protected during transport? Is there a transport protection device?

No, the Centrifuges 5804/ 5804 R and 5810/ 5810 R do not come with a transport protection device. They are packaged in polystyrene for protection. Because the rotor is not in the centrifuge during transport, there are no movable parts to make a transport protection device necessary.

Can I still change the settings when I have started the Centrifuges 5804/ 5804 R or 5810/ 5810 R?

Yes, the speed, the time and the temperature can be changed even when the centrifuge is running. To do this, please press the SPEED, TIME or TEMP key and change the values by pressing the arrow keys.

How can I recognize in the display of the Centrifuges 5804/ 5804 R or 5810/ 5810 R whether I have selected "rpm" or "rcf"?

For rcf, a "*" is displayed in front of the value. rpm is not indicated by a symbol.

What is the minimum rotational speed (rpm) of the Centrifuge 5804/ 5804 R or 5810/ 5810 R, and in which increments can it be increased?

The minimum rotational speed is 200 rpm, irrespective of the inserted rotor. The minimum rotational speed can be increased in increments of 10 rpm up to 5,000 rpm and then in increments of 100 rpm.

Is it possible to adjust the Centrifuge 5804/ 5804 R or 5810/ 5810 R so that it stops on its own, meaning without active braking?

Yes. Free deceleration of your centrifuge can be achieved by setting the braking level to 0.

"Clean rotor" appears on the display of my centrifuge. Do I now need to remove the rotor from the centrifuge, and, if yes, how?

This display appears every 200 centrifugation runs. For cleaning the rotor and the rotor chamber, the rotor must first be removed from the centrifuge. To do this, loosen the rotor nut by turning it counter-clockwise with the supplied rotor key. Please clean the rotor and rotor chamber only with mild cleaning agents (e.g. 70% alcohol solutions or commercially available alcoholic disinfectants).

The Centrifuges 5804/ 5804 R and 5810/ 5810 R are programmable. What is saved during the programming?

All data is saved that can also be entered manually, such as rotational speed or RCF, maximum radius, run time, acceleration and braking ramps, "at set rpm", temperature.

Is it possible to centrifuge 50 mL and 15 mL tubes together in one rotor?

Yes, it is possible, provided that the rotor is loaded symmetrically. This means that the 50 mL tubes and the 15 mL tubes are positioned opposite one another and are positioned symmetrically. Please use the appropriate adapters for the tubes.

Does Eppendorf offer a rotor for PCR strips for Centrifuges 5804/ 5804 R or 5810/ 5810 R?

The PCR strip rotor F-45-48-PCR is available under the order number 5804 735.005. It can centrifuge up to 6 x 8-well strips at 12,000 rpm / 15,350 x g.

In which rotor is it possible to centrifuge 50 mL DIN glass tubes?

50 mL DIN glass tubes (diameter 34 mm, length 100 mm) can be centrifuged in the adapter for 50 - 75 ml tubes (order number 5804 760.000) of the swing-bucket rotor A-4-44 or adapter 5810 760.003 of swing-bucket rotor A-4-62 . Depending on the length of the tube, the uppermost module of the adapter can be removed for centrifugation of 50 mL DIN glass tubes.

Millipore offers centrifugation filter tubes (Centripreps). Can these tubes be centrifuged in a rotor of the Centrifuge 5810/5810 R?

Yes, for 50 mL Centripreps we offer the adapter 5810 739.004 for the rotor A-4-81.

How big is the g-force difference between the lowest and the highest plate when loading a bucket of the rotor A-2-DWP with four microplates?

The following g-forces are reached with the rotor A-2-DWP: Lowest plate: 2,250 x g Highest plate: 1,825 x g

Is there an adapter to spin microscope slides in centrifuge 5804 / 5804 R / 5810 / 5810 R?

Up to 12 slides can be inserted into the CombiSlide adapter 5825706005 and then centrifuged in the swing out rotors of Centrifuge 5804/ 5804 R or 5810/ 5810 R.

Can 4 microplate buckets (order number 5810702003) be fitted into the rotor A-4-62 (5810709008) of Centrifuge 5810 / 5810 R?

Yes. It is the same rotor cross. Please note that mixed loading of the rotor with rectangular buckets and MTP buckets is not permitted.

Can rotor A-4-81 or S-4-104 be operated with rectangular buckets and MTP / Flex buckets?

Yes, this so-called mixed loading is possible. Please ensure that the same type of buckets are always used in opposing positions.

Do the adapters for the 0.2/ 0.4/ 0.5/ 0.6 mL tubes, which are designed for the rotors F-45-30-11 and FA-45-30-11, also fit into the rotor F-34-6-38 with the adapter 5804 770.005 (for 1.5/ 2.0 mL tubes)?

Yes, these adapters can also be used in the rotor F-34-6-38 with the adapter 5804770005.

There are 2 different adapters for the 15 mL tubes. One for tubes with round bottoms and one with a conical bottom for conical tubes. Can I not use one adapter for both tubes?

No, unfortunately this is not possible. In order to be able to reach the high rotational speeds, the adapters must be form-locking.

Do the adapters for the 0.5 mL tubes fit into the rack for 1.5/ 2.0 mL tubes of the rotor T-60-11 for centrifuge 58xx?

Yes, the adapters can be inserted into the rotor for centrifugation of 0.5 mL tubes.

The writing on one rotor of the Centrifuge 5804/ 5804 R or 5810/ 5810 R says, for example, "6x125g". Does this mean that the centrifuge only enables an RCF of 125 or that it can only be loaded with a maximum of 6 times 125 gram?

This label states that the rotor can be loaded with a maximum of 6 x 125 gram. "g" is the official abbreviation for "gram". Where "g" is used as an abbreviation of "g-force", the number and "x g" are used. Example: 10,800 x g.

How many times can aluminum rotors be autoclaved?

Aluminum rotors can be autoclaved up to 100 times for 20 minutes at 121 °C.

Does the Centrifuge 58xx R has an energy saving function?

Yes, the ECO shut-off automatically switchs off the compressor after 8 hours of non-use. The device has a stand-by button.

Is it possible to switch off the brakes of Centrifuges 5804/ 5804 R or 5810/ 5810 R, e.g. when centrifuging a gradient?

Yes. Free deceleration of your centrifuge can be achieved by setting the braking level to 0.

Can the new rotor generation be used with older Centrifuges without retrofitting?

Yes, you can use the new rotors from software version 8.4 onwards. From versionb 7.0 on a software update to version 8.4 can easily be performed by trained service technician. In case of older software versions, the complete PCB control/frequency converter must be replaced. You can see the current software version of your centrifuge briefly on the display after switching it on.

How does the Centrifuge recognize that a different rotor is in use?

A new rotor automatically will be recognized as soon as it starts moving. Moving and recognition of the rotor can be performed manually by making it spin counterclockwise (roughly 200 rpm necessary), or by turning the Centrifuge on. As soon as the rotor starts spinning it will be recognized. When indicated, the Centrifuge shuts down under specification of max. speed in case the indicated max. speed of the previous rotor was higher. In this case the Centrifuge must be restarted.

Is it possible, in addition to 25 cm2 flasks, to use 75 cm2 flasks also?

Only a limited choice of 72 cm2 flasks are possible to be centrifuged: We recommend to use Saarstedt flasks (Article number 831811-002) with the cell culture flask adapter (Article number 5825719000) in combination with rotor A-4-81-MTP/Flex or A-4-62-MTP and Centrifuge 5810/ R.

For which centrifuge can we use our mobile tables 5921 000 010 and 5921 000 012?

The mobile tables can be used for centrifuges 59xx as well as 58xx.

text.skipToContent text.skipToNavigation

NO | NOK

No results found

Search Suggestions

Product Families

Show all Product Families ()

Article

Show all Articles ()

Content

Show all Content ()

Centrifuge 5810/ 5810 R - Your workhorse in the lab

Benchtop Centrifuge 5810 and 5810 R with mixed loading capability for tubes, bottles, and plates

Eppendorf Rotor S-4-104 for benchtop centrifuge Centrifuge 5810/ 5810 R

Eppendorf plate Rotor S-4-104 for benchtop Centrifuge 5810/5810 R

Eppendorf Rotor S-4-104 with Vacutainer for benchtop Centrifuge 5810/5810 R

Rotor S-4-104 with Vacutainer for benchtop centrifuge Centrifuge 5810/5810 R

Eppendorf QuickLock® caps for benchtop centrifuge Centrifuge 5810/5810 R

Centrifuge Rotor FA–45–6–30 with QuickLock® lid mechanism

Eppendorf Rotor FA-45-48-11 with Eppendorf QuickLock® technology

General Lab Product Version

IVD Product Version

Product Information

High-speed Centrifuge 5810/5810 R: Compact and powerful

The high-speed Centrifuge 5810/5810 R is one of the smallest 3 L benchtop centrifuge currently available. It is the workhorse for medium to high-throughput laboratories and combines versatility and high capacity to allow you to use both tubes and plates.

Show more Product Information

You will find additional download material at the bottom of this page

Products (2)

Sets & Bundles (8)

Services (26)

Rotors (22)

Accessories (2)

2 Products

Centrifuge 5810

keypad, non-refrigerated, without rotor
230 V/50 – 60 Hz (EU)

More Product Details ...

Quantity

Check stock

Catalog no. 5810000010

Price

NOK 67,500.00

Inquire

Centrifuge 5810 R

keypad, refrigerated, without rotor
230 V/50 – 60 Hz (EU)

More Product Details ...

Quantity

Check stock

Catalog no. 5811000015

Price

NOK 111,200.00

Inquire

Show more Products

Added to Your Cart

Product Information

Technical Data

Features

Eppendorf Centrifuge 5810 and 5810 R

The 5810 series, with its renowned quality and reliability, offers you the most cost-effective solution for medium to high-throughput applications requiring speeds of up to 20,913 x g (14,000 rpm). The Eppendorf Centrifuge 5810/5810 R benchtop centrifuge has been designed to fit into every lab and make routine work more comfortable thanks to its quiet operation, soft-touch lid closure and low access height for easy loading and unloading.

Versatility of Eppendorf Centrifuge 5810/5810 R

Experience true versatility with a broad selection of rotors and adapters that facilitate mixed loading of tubes, bottles and plates. A new generation of rotors increases the capacity of Centrifuge 5810/5810 R to a maximum of 4 x 750 mL (or 28 x 50 mL / 56 x 15 mL). The swing-bucket rotor and adapters accommodate tubes and bottles from 0.2 mL to 750 mL, and the fixed-angle rotor 0.2 mL to 85 mL tubes. The plate rotor is ready for you to carry out centrifugation of all types of multiwell plates, such as PCR, cell culture, or deep-well plates.

Centrifuge 5810/5810 R: The laboratory workhorse

Eppendorf benchtop centrifuge Centrifuge 5810/5810 R are the workhorse for laboratories with a medium to high sample-throughput.

Aerosol-tight lids for easy, one-hand operation

The Eppendorf QuickLock^® caps significantly improve handling and facilitate easy, one-handed operation. You can safely transport the closed bucket with the handle to the biosafety cabinet where it can be opened in a safe environment.

Proud owner of an Eppendorf product? Already registered?

Did you know that if you register your Eppendorf Centrifuge 5804 R or 5804 with us you will get the following?
• 100 epPoints^® (for each product you register) to redeem in our rewards shop
• Additional 3 months warranty when you register a centrifuge, shaker, CO₂ incubator or cycler
• Entry in an exclusive Eppendorf prize draw (for each product you register)
• Get your personal product story to be posted on the Eppendorf website

Getting started is super easy! Either -
1. Download the Eppendorf App, scan and register OR
2. Visit our webpage, log onto your myEppendorf account and enter the product serial number
More information: www.eppendorf.link/product-registration

End-of-life

Disposal of packaging
The packaging of the Eppendorf Centrifuge 5810/5810 R contains different materials, this can include a wooden pallet, cardboard, a plastic dust cover, and some foam parts. Recycling of materials becomes more and more important every day: Are you aware that nearly all cardboard material is recycled in Europe? Our centrifuge packaging cardboard material consists of ca. 50% recycling material. Please support the global sustainability initiative of recycling valuable raw material by also collecting the freezer cardboard packaging material and disposing of it in the appropriate collection container at your organization. In respect to the plastic dust cover made of LD-PE and the foam parts, we recommend to select a dedicated recycling partner where PE material can be recycled. We suggest you contact your local waste hauler or facility management team to understand the available recycling options for your organization.

Disposal of instrument
Our Eppendorf Centrifuge 5810 and 5810 R last for many years, but if they need to be replaced, we kindly ask you to fulfill local requirements for disposal of these instruments. We strongly recommend a certified local recycling partner with experience in instruments with active cooling. Keeping it “local“ reduces the impact of transportation, and the "certified" aspect is recommended due to the safe and sustainable removal and recycling of the cooling liquids if it is a refrigerated centrifuge.

Decontamination
This piece of equipment was used in a laboratory and/ or was used to handle biological samples. Please keep in mind to adequately decontaminate the equipment which needs to be disposed. Check local requirements. For more information, get in contact with your local biosafety officer and/ or waste officer. Check if your local recycling partner has special instructions and/ or documentation requirements. You may also use the Eppendorf decontamination form sheet as guidance.

Read Less

Specifications	5810	5810 R

Max. RCF	20913 × g	20913 × g
Max. RCF with fixed-angle rotor	20913 × g	20913 × g
Max. RCF with swing-bucket rotor	4500 × g	4500 × g
Max. RCF with plate rotor	3486 × g	3486 × g
Speed	200 – 14,000 rpm	200 – 14,000 rpm
Product type	Centrifuges	Centrifuges
Rotors available	18	18
Max. capacity	4 × 750 mL/4 × 4 MTP	4 × 750 mL/4 × 4 MTP
Acceleration/braking ramps	10/10	10/10
Number of programs	35 user-defined programs	35 user-defined programs
Timer	1 min to 99 min, with continuous run function, short-spin	1 min to 99 min, with continuous run function, short-spin
Noise level	<70 dB(A)	<56 dB(A)
Power supply	230 V, 50 – 60 Hz	230 V, 50 – 60 Hz
Max. power consumption	900 W	1650 W
Dimensions (W × D × H)	53,5 × 60,8 × 34,5 cm / 21,1 × 23,9 × 13,6 in	70,0 × 60,8 × 34,5 cm / 27,6 × 23,9 × 13,6 in
Footprint (dimensions w/o front panel, WxD)	54 × 54 cm /  21.1 × 21.1 in	70 × 54 cm /  27.6 × 21.1 in
Product weight	68 kg / 149,9 lb	99 kg / 218,3 lb
Height (with open lid)	80 cm / 31,5 in	80 cm / 31,5 in
Cooling	non-refrigerated	refrigerated
Temperature range	–	-9 °C to 40 °C

Max. capacity
Conical tubes	56 × 15 mL/ 28 × 50 mL	56 × 15 mL/ 28 × 50 mL
Plates	16 × MTP/ 4 × DWP	16 × MTP/ 4 × DWP
Blood collection tubes	100 × 13 mm/ 80 × 16 mm	100 × 13 mm/ 80 × 16 mm

Noise level
Rotor FA-45-6-30 (6×50 mL)	<56 dB(A)	<55 dB(A)
Rotor S-4-104 (4×750 mL)	<70 dB(A)	<56 dB(A)
Rotor S-4-72 (4×250 mL)	–	–

Downloads: Centrifuge 5810/ 5810 R

Selection Guide

Centrifuge Family Overview

Overview of all Centrifuges: Capacity and Technical Data

PDF .5MB

English

Brochure

Reliable Performance - Centrifuge 5804/5804 R and Centrifuge 5810/5810 R

Centrifuge 5804/5804 R and Centrifuge 5810/5810 R

PDF 14.7MB

English

You might also consider

Eppendorf ThermoMixer^® C

The Eppendorf ThermoMixer C can heat, cool, and mix samples for incubation steps. Dedicated exchangeable SmartBlocks for different vessel formats provide flexibility.

Eppendorf Deepwell Plates

High-quality, superior performance Eppendorf Deepwell Plates.

Transparent Conical tubes, 15 mL and 50 mL

Eppendorf Conical Tubes 15 mL and 50 mL

High quality conical tubes 15 mL and 50 mL

Mobile Tables

Centrifuge 5425/5425 R

Whisper quiet 24-place gold standard microcentrifuges

Centrifuge 5810/ 5810 R - Your workhorse in the lab

Do I need IVD?

Product Information

High-speed Centrifuge 5810/5810 R: Compact and powerful