Are start and end position of the SmartBlocks the same?

No. Start and end position are not identical.

How can the temperature accuracy be verified?

The best possible temperature accuracy can be guaranteed by individually adjusting a SmartBlock. Optimized temperature control for each block type keeps temperature overshoots and deviations caused by external interferences to a minimum. To guarantee optimal performance over the entire period of use, Eppendorf offers a preventive maintenance program and certification services: your Eppendorf ThermoMixers, ThermoStat C as well as the SmartBlocks are regularly cleaned, checked and adjusted. Additional information is available at: https://www.eppendorf.com/epservices . Customers can also verify the temperature accuracy by themself. Eppendorf provides for that purpose the Temperature Verification System – Single Well for Eppendorf Mastercyclers (0056 000.003) in combination with the 384 well Sensor (0056 002.006).

Can cell culture plates be used in the SmartBlock plates?

Also cell cultuture plates can be used in the SmartBlock plates in so far the dimensions of the plate comply to the SBS standard.

Is it possible to put the SmartBlocks for a rapid cool down into a -20°C freezer?

The SmartBlocks can be used at ambient temperatures of 5°C – 40°C and can be cooled appropriate. Cooling down of SmartBlocks in a freezer should not be done.

Which SmartBlocks and vessels can be used with ThermoMixers F?

The ThermoMixers F possess a fix installed SmartBlock and can only be used with the appropriate microtest tubes or plates, such as MTP’s, DWP’s or skirted plates complying the SBS standard. For using PCR plates our SmartBlocks PCR 96 and PCR 384 in combination with ThermoMixer C is the proper choice.

Do the IsoRacks fit upon the SmartBlocks for microreaction tubes (0.5 mL; 1.5 mL; 2.0 mL)?

No. The IsoRacks fit only upon the Thermoblocks for the older devices Thermomixer comfort, Thermomixer compact & ThermoStat plus.

Can PCR plates be used in SmartBlock plates respectively ThermoMixer FP?

SmartBlock plates and ThermoMixer FP (with the fixed SmartBlock plates) are dedicated for using MTP’s, DWP’s and also other skirted plates which meet the SBS standard. For optimal usage of PCR plates the SmartBlock PCR 96 and PCR 384 in combination with ThermoMixer C or ThermoStat C is the proper choice. These SmartBlocks possess conical bores which surround the conical wells of PCR plates properly for a perfect temperature transition.

Smart Block cryo Thaw on ThermoMixer C - What is the ‘Thawing cells’ program?

The 'Thawing cells' program is an optimized program to thaw mammalian cells in 1.8-2.0 mL cryovials: reproducibly contamination free standardized It is a ready-to use program, in most cases no changes are required. The pre-set time is 3 minutes (can be extended up to 5 minutes), the pre-set mixing frequency is 500 rpm (can be adapted between 300 – 800 rpm), the temperature profile is fixed. The settings are based on tests with standard mammalian cell lines (CHO, HEK, S16) up to highly sensitive stem cells (hiPSCs) at tested conditions with 2.0 mL cryovials / 1.0 mL fill (1 – 5 vials in parallel). Other volumes or more vials may require an adaption of thawing time. Further information can be found in the Application Note 437 .

What is the difference between the SmartBlock cryo thaw and the SmartBlock cryo?

The 'SmartBlock cryo thaw' replaces the 'SmartBlock cryo'. Newly implemented is an automatic function for thawing cells (program 'Thawing cells') which is available in combination with the ThermoMixer C.

Is it possible to use the SmartBlock cryo thaw with the ThermoStat C?

The SmartBlock cryo thaw is still compatible with the ThermoStat C. However, the automatic thawing function 'thawing cells' is limited to the ThermoMixer C as it requires mixing.

The ThermoMixer C does not show the program ‘Thawing cells’ when inserting the SmarBlock cry thaw. Why?

The software version 3.5.0 or higher is required on the ThermoMixer C to operate the program 'Thawing cells'. How to upgrade the software is described in the operating manual.

Is it possible to use the SmartExtender with the SmartBlock cryo thaw?

The Smart Extender can be used with the SmartBlock cryo thaw, but not in parallel a 'Thawing cells' program is running. In case the user is operating the SmartExtender and intends to start the thawing procedure, the user is informed by a message with the option to stop the SmartExtender and vice versa. There is no automatic stop or re-start of the running program to not disturb the application.

SmartBlock cryo thaw - Does the mixing during the thawing program harm the cells?

No, in opposite, a slight mixing (500 rpm paired with a small 3 mm orbit) serves to distribute the temperature in the vial evenly reduces temperature gradients and inhomogeneous warming of cells by preventing sedimentation Reproducibility and confirm the suitability of the thawing method has been proven with: in-vial temperature measurements analyzing post-thawing cell viability further downstream tests (confirming pluripotency for stem cells). Further information can be found in the Application Note 437 (https://www.eppendorf.com/ThermoMixer)

Is it possible to use former SmartBlock cryo with the program ‘thawing cells’?

No, the program 'thawing cells' is limited to the SmartBlock cryo thaw.

text.skipToContent text.skipToNavigation

KR | KRW

결과 없음

검색 제안

제품군

모든 제품군 표시 ()

기사

모든 기사 표시 ()

콘텐츠

모든 콘텐츠 표시 ()

Eppendorf SmartBlock

Eppendorf ThermoStat C with selection of different Smartblocks

Eppendorf SmartBlock removal by pressing the lever (Step 1)

Eppendorf SmartBlock removal by pressing the lever (Step 2)

Eppendorf SmartBlock removal by pressing the lever (Step 3)

Eppendorf SmartBlock for 24 x 1.5 mL vessels

Eppendorf SmartBlock for 24 x 2.0 mL vessels

Eppendorf SmartBlock for 8 x 5.0 mL vessels

Eppendorf SmartBlock for 8 x 15.0 mL vessels

Eppendorf SmartBlock for 4 x 50.0 mL vessels

Adapter for 25 mL conical tubes to be used in Eppendorf ThermoMixer C

Eppendorf SmartBlock for 24 x 12 mm vessels

Eppendorf SmartBlock for 24 x cryo vessels with several cryovials

Eppendorf SmartBlock DWP 500 with white DWP

Eppendorf SmartBlock DWP 1000 with DWP at bench

Eppendorf SmartBlock for plates incl white-blue DWP

Eppendorf SmartBlock for 96-well PCR plates with blue 96-well semi-skirted PCR plate

Eppendorf SmartBlock for 384-well PCR plates with red PCR plate

Eppendorf Transfer_Rack_1.5/2.0 mL_to transfer samples from Eppendorf ThermoMixer C

Set of Eppendorf SmartBlocks with ThermoTop

제품 정보

교체하는 데 단 몇 초면 충분합니다.
개별 센서 제어식 SmartBlocks은 정확하고 균일한 온도를 유지하기 위한 최상의 솔루션입니다. 모든 일반적인 실험실 vessel을 위한 이 다양하고 유연한 thermoblock을 Eppendorf ThermoMixer^® C(heating/cooling 및 mixing) 및 ThermoStat C(heating/cooling)와 함께 광범위한 실험에 사용할 수 있습니다.

제품 정보 자세히 표시

이 페이지 하단에서 추가 다운로드 자료를찾을 수 있습니다.

제품 정보

기술 정보

특징

실험실 워크플로우 내에서 다양한 vessel 크기를 사용하고 계십니까?
이렇게 유연한 제품을 보신 적이 있으십니까? Eppendorf는 Eppendorf ThermoMixer^® C 및 ThermoStat C와 함께 사용할 수 있는 다양한 0.2 mL ~ 50 mL tube 및 plate(MTP, DWP 및 PCR plates 96 / 384)용 Eppendorf SmartBlocks을 제공합니다. 모든 Eppendorf SmartBlocks에는 블록을 더욱 쉽고 빠르게 교체할 수 있는 혁신적인 Eppendorf QuickRelease 시스템이 장착되어 있습니다.
최적의 맞춤과 온도 전달을 위해 Eppendorf Deepwell Plates를 Eppendorf SmartBlock DWP 500 및 Eppendorf SmartBlock DWP 1000과 함께 사용할 것을 권장합니다. Eppendorf SmartBlock DWP 500 및 Eppendorf SmartBlock DWP 1000은 Eppendorf Deepwell Plates.에서만 사용할 수 있습니다.

공구가 없습니까?

Eppendorf SmartBlocks는 교체가 간편합니다. 블록 앞에 있는 레버를 누르기만 하면 공구 없이 단 몇 초 안에 블록을 제거할 수 있습니다.

간단히 보기

사양	SmartBlock 0.5 mL	SmartBlock 1.5 mL	SmartBlock 2.0 mL	SmartBlock 5.0 mL	SmartBlock 15 mL	SmartBlock 50 mL	SmartBlock PCR 96	SmartBlock PCR 384	SmartBlock 플레이트	SmartBlock DWP 500	SmartBlock DWP 1,000	SmartBlock cryo thaw	SmartBlock 12 mm

ThermoTop	예	예	예	−	−	−	예	예	예	예	예	아니요	−
시료 용량	24 × micro test tubes (0.5 mL)	24 × micro test tubes (1.5 mL)	24 × micro test tubes (2.0 mL)	8 × 5 mL	8 × 15 mL conical tubes	4 × 50 mL conical tubes	96웰 플레이트	384웰 플레이트	1 × micro test plate / 1 × deepwell plate	Eppendorf Deepwell Plates 96/500 µL	Eppendorf Deepwell Plates 96/1,000 µL	24 × cryo tubes (1.5/2.0 mL)	24 × micro test tubes, diameter 12 mm
SmartExtender	예	예	예	예	예	예	예	예	예	예	예	예	예
ThermoMixer C / ThermoStat C	예	예	예	예	예	예	예	예	예	예	예	예	예
최대 온도	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	110 °C¹⁾	110 °C¹⁾
뚜껑²⁾	예	예	예	−	−	−	예	예	예	예	예	−	−

1)ThermoStat C에서만 가능

2)뚜껑 사용 시 최대 Mixing 회전수는 2,000 rpm입니다.

다운로드: Eppendorf SmartBlock

브로슈어

The Value of Mixing

Eppendorf Temperature Control and Mixing Instruments

PDF 2.1MB

영어

또한 고려할 수 있습니다.

Eppendorf Tubes^® 5.0 mL

0.5 mL ~ 5.0 mL의 시료를 위한 탁월한 품질의 microtube

Eppendorf Microplate with OptiTrack® matrix

Eppendorf Microplates

탁월한 투명도를 보장하는 Eppendorf Microplate

DNA LoBind® tubes - 0.5 mL, 1.5 mL, 2 mL and 5 mL with closed lid

Eppendorf Safe-Lock Tubes

Eppis - Eppendorf Safe-Lock Tubes는 우발적인 열림을 방지해 배양 및 보관 중에 누출 위험을 최소화합니다.

Eppendorf Deepwell Plates

뛰어난 품질과 우수한 성능을 제공하는 Eppendorf Deepwell Plates.

Eppendorf ThermoStat C

Eppendorf ThermoStat C는 배양 단계를 위해 시료를 heating 및 cooling하는 데 사용됩니다. 다양한 vessel 형식에 전용 교체형 SmartBlocks을 사용할 수 있어 유연성이 뛰어납니다.

Eppendorf ThermoMixer^® C

Eppendorf ThermoMixer C는 배양 단계를 위해 시료를 heating, cooling 및 mixing하는 데 사용됩니다. 다양한 vessel 형식에 전용 교체형 SmartBlocks을 사용할 수 있어 유연성이 뛰어납니다.

ThermoTop^®

ThermoTop은 ThermoMixer 또는 ThermoStat을 사용할 때 온도 배양 중에 시료 튜브 내의 응축을 제한합니다.

이 사이트에서 나가려고 합니다.

Eppendorf SmartBlock