- 12 SLAS/ANSI deck positions and automatic tool exchange for 4 tools and gripper
- Volume range from 0.2 to 1,000 µL (depending on used dispensing tools)
- Compatible with tubes from 0.2 mL to 50 mL and micro and PCR plates up to 384 wells
- Optical sensor for detecting liquids, labware, tips
- MultiCon PC controller with intuitive drag-and-drop-based software, simulation, network and software upgrade options
- Optional UV lamp and air filter system for decontamination and clean air conditions
- Integrated vacuum pump − silent operation, no tubing, wiring or reservoirs to maintain
- Optional up to 3 thermal modules for heating or cooling (0 – 110 °C) of samples or reagents
- Integrated LEDs for deck illumination and visual feedback of system status like idle, run in progress or run finished
- Optional software extensions for handling barcodes and supporting regulated environments complaint to e. g. 21 CFR part 11
IN | INR
No results found
Search Suggestions
epMotion® 5075v
Motion 5073t, equipped
epMotion 5075v
Product Information
- MultiCon PC, completely contained housing, vacuum system with accessories, gripper, epBlue software, keyboard, mouse, system for solid and liquid waste
- 100 – 240 V/50 – 60 Hz, 0.2 µL – 1 mL, (depending on dispensing tools)
You will find additional download material at the bottom of this page
Technical Data
Features
Technical Data
| Specifications | epMotion® 5075v |
|---|
|
Eppendorf ThermoMixer® |
|
| Speed | − |
| Time range setting | − |
| Max. load | − |
| Temperature range | − |
| Heating rate | − |
| Cooling rate above RT | − |
| Cooling rate below RT | − |
|
Thermal module |
|
| Max. number of modules | 3 |
| Time range setting | 1 – 120 min |
| Temperature range | 0 °C – 110 °C |
| Heating rate | 9 °C/min |
| Cooling rate | 4 °C/min |
|
Vacuum unit |
|
| Vacuum max. output | 35 NL/min |
| Suction range | 0.1 – 85 kPa |
| Suction time | 1 sec to 36 min |
| Volume range | 0.2 µL – 1 mL |
| Operating mode | automation |
| Autoclavable | yes (tools) |
| Power supply | 100 – 240 V, 50 – 60 Hz |
| Consumables | epT.I.P.S. motion tips as racks or reload |
| Max. power consumption | 700 W |
| Dimensions (W × D × H) | 108 × 62 × 81 cm / 43 × 25 × 32 in |
| Product weight | 123 kg / 271 lb |
| SLAS/ANSI positions | 12 |
