- 6 SLAS/ANSI deck positions and automatic tool exchange for 3 tools and gripper
- Volume range from 0.2 to 1,000 µL (depending on dispensing tools used)
- Compatible with tubes from 0.2 mL to 50 mL and micro and PCR plates up to 384 wells
- Optical sensor for detecting liquids, labware, tips
- MultiCon PC controller with simulation, network and software upgrade options
- Intuitive drag-and-drop-based software
- Optional UV lamp and air filter system for decontamination and clean air conditions
- Integrated Eppendorf ThermoMixer (300 – 2,000 rpm; 4 – 95 °C) with 2DMix-Control Technology
- Integrated LEDs for deck illumination and visual feedback of system status like idle, run in progress or run finished
- Optional software extensions for handling barcodes and supporting regulated environments complaint to e.g. 21 CFR part 11
MENU
IN | INR
IN | INR
-
- Benchtop Centrifuges
- Floor-Standing Centrifuges
- Refrigerated Centrifuges
- Microcentrifuges
- Multipurpose Centrifuges
- High-Speed Centrifuges
- Ultracentrifuges
- Concentrator
- High-Speed and Ultracentrifugation Consumables
- Accessories
- Tubes
- Plates
- Device Management Software
- Sample and Information Management
No results found
Search Suggestions
epMotion® 5073t
Product Information
- MultiCon PC, completely contained housing, ThermoMixer, epBlue software, keyboard, mouse, system for solid and liquid waste
- 100 – 240 V/50 – 60 Hz, 0.2 µL – 1 mL, (depending on dispensing tools)
You will find additional download material at the bottom of this page
Technical Data
Features
Technical Data
| Specifications | epMotion® 5073t |
|---|
|
Eppendorf ThermoMixer® |
|
| Speed | 300 – 2,000 rpm |
| Time range setting | 30 s – 120 min |
| Max. load | 1,000 g / 2.2 lb |
| Temperature range | 15 °C below RT to 95 °C |
| Heating rate | 5 °C/min |
| Cooling rate above RT | 3 °C/min |
| Cooling rate below RT | 1 °C/min |
|
Thermal module |
|
| Max. number of modules | − |
| Time range setting | − |
| Temperature range | − |
| Heating rate | − |
| Cooling rate | − |
| Volume range | 0.2 µL – 1 mL |
| Operating mode | automation |
| Autoclavable | yes (tools) |
| Power supply | 100 – 240 V, 50 – 60 Hz |
| Consumables | epT.I.P.S. motion tips as racks or reload |
| Max. power consumption | 400 W |
| Dimensions (W × D × H) | 68 × 62 × 81 cm / 27 × 25 × 32 in |
| Product weight | 93 kg / 205 lb |
| SLAS/ANSI positions | 6 |
