- Up to 15-position worktable
- Volume range from 0.2 to 1,000 µL (depending on dispensing tools used)
- Automatic tool exchange for up to 4 tools
- MultiCon PC controller with simulation, network and software upgrade options
- A plate magnet together with thermal mixer enables magnetic bead-based purification in plates
- Range of features can differ depending on system configuration
MENU
IE | EUR
IE | EUR
-
- Benchtop Centrifuges
- Floor-Standing Centrifuges
- Refrigerated Centrifuges
- Microcentrifuges
- Multipurpose Centrifuges
- High-Speed Centrifuges
- Ultracentrifuges
- Concentrator
- High-Speed and Ultracentrifugation Consumables
- Accessories
- Tubes
- Plates
- Device Management Software
- Sample and Information Management
- IVD Products
No results found
Search Suggestions
epMotion® 5073t NGS Solution
Product Information
- MultiCon PC, 3 tools, gripper, plus NGS specific accessories and consumables, waste bags and holder
- 100 – 240 V ±10 %/50 – 60 Hz ±5 % (EU/AU/CN/GB/US), 0.2 µL – 1 mL, (depending on dispensing tools)
You will find additional download material at the bottom of this page
Technical Data
Features
Technical Data
| Specifications | epMotion® 5073t NGS Solution |
|---|
|
Eppendorf ThermoMixer® |
|
| Speed | 300 – 2,000 rpm |
| Time range setting | 30 s – 120 min |
| Max. load | 1,000 g / 2.2 lb |
| Temperature range | 15 °C below RT to 95 °C |
| Heating rate | 5 °C/min |
| Cooling rate above RT | 3 °C/min |
| Cooling rate below RT | 1 °C/min |
| Volume range | 0.2 µL – 1 mL |
| Operating mode | automation |
| Autoclavable | yes (tools) |
| Power supply | 100 – 240 V ±10 %, 50 – 60 Hz ±5 % |
| Consumables | epT.I.P.S. motion tips as racks or reload |
| Max. power consumption | 400 W |
| Dimensions (W × D × H) | 65 × 61 × 77 cm / 26 × 24 × 30 in |
| Product weight | 63 kg / 139 lb |
| SLAS/ANSI positions | 6 |
