- Max. rotor capacity: 18 × 1.5/2.0 mL vessels
- Max. speed: 16.873 × g (14,000 rpm)
- Small footprint and low access height of 23 cm
- OptiBowl® design for quiet operation – even without a rotor lid
- Eppendorf QuickLock® rotor allows for fast and ergonomic lid locking
- Soft-touch one-finger lid closure for ergonomic operation
- Temperature range from 0 °C to +40 °C
- Guaranteed temperature of 4 °C at maximum rotational speed
- FastTemp function for quick pre-cooling and maximum temperature accuracy inside the rotor
- ECO power shut-off engages after 8 hours of nonuse to reduce energy consumption (46 % over night) and extend compressor life (can be deactivated)
MENU
HU | EUR
HU | EUR
-
- Benchtop Centrifuges
- Floor-Standing Centrifuges
- Refrigerated Centrifuges
- Microcentrifuges
- Multipurpose Centrifuges
- High-Speed Centrifuges
- Ultracentrifuges
- Concentrator
- High-Speed and Ultracentrifugation Consumables
- Accessories
- Tubes
- Plates
- Device Management Software
- Sample and Information Management
- IVD Products
No results found
Search Suggestions
Centrifuge 5418 R (EU-IVD)
Centrifuge 5418R, 18x2ml AT-rotor
The Centrifuge 5418 R is a non-automatic centrifuge for the separation of liquid substance mixtures from the human body and is specifically intended to be used as an accessory together with an in vitro diagnostic device and to enable its use according to its intended purpose. This product complies with the requirements of the EU In Vitro Diagnostics Regulation (IVDR) 2017/746. Eppendorf centrifuges are exclusively intended for indoor use by trained specialists.
The Centrifuge 5418 R is a non-automatic centrifuge for the separation of liquid substance mixtures from the human body and is specifically intended to be used as an accessory together with an in vitro diagnostic device and to enable its use according to its intended purpose. This product complies with the requirements of the EU In Vitro Diagnostics Regulation (IVDR) 2017/746. Eppendorf centrifuges are exclusively intended for indoor use by trained specialists.
-
IVD
Product Information
- rotary knobs, refrigerated, with Rotor FA-45-18-11 and rotor lid
- 230 V/50 – 60 Hz (EU)
You will find additional download material at the bottom of this page
Technical Data
Features
Technical Data
| Specifications | 5418 R |
|---|
| Max. RCF | 16873 × g |
| Max. RCF with fixed-angle rotor | 16873 × g |
| Speed | 100 – 14,000 rpm (100 rpm steps) |
| Product type | Centrifuges |
| Rotors available | 1 |
| Max. capacity | 18 × 1.5/2.0 mL |
| Acceleration time1) | 13 s |
| Deceleration time1) | 13 s |
| Timer | 30 s to 9:59 h, with continuous run function |
| Noise level | < 57 dB(A) |
| Power supply | 230 V, 50 – 60 Hz |
| Max. power consumption | 320 W |
| Dimensions (W × D × H) | 30 × 46 × 25 cm / 11,7 × 18,23 × 9,8 in |
| Product weight | 22 kg / 48,5 lb |
| Height (with open lid) | 52 cm / 20 in |
| Cooling | refrigerated |
| Temperature range | 0 °C to +40 °C |
1)Acceleration and deceleration times may vary depending on rotor, load and voltage version.
Features
- Temperature range from 0 °C to +40 °C
- Guaranteed temperature of 4 °C at maximum rotational speed
- FastTemp™ function for quick pre-cooling and maximum temperature accuracy inside the rotor
- ECO power shut-off engages after 8 hours of nonuse to reduce energy consumption (46 % over night) and extend compressor life (can be deactivated)
- The patented compressor technology reduces vibrations and protects your samples
- Built-in condensation drain to eliminate water accumulation in the rotor chamber
