- Cooled with natural refrigerant (R290) to protect your samples - and the planet
- Rotor capacity (up to): 48 × 1.5/2.0 mL, 12 × 5.0 mL; Eppendorf QuickLock® rotor allows for fast and ergonomic lid locking
- Max. speed: 25,001 × g (16,220 rpm)
- High capacity 48-place rotor significantly increases productivity to save you valuable time
- Soft touch one-finger closure for ergonomic operation
- Temperature range from -11 °C to 40 °C
(This represents the minimum and maximum temperatures that can theoretically be reached. Please note that the actual minimum and maximum temperatures depend on the rotor and speed used.) - FastTemp function for quick pre-cooling of the centrifuge, e.g., from ~ 23 °C to 4 °C in only 11 minutes
- ECO shut-off can be programmed to engage after 1, 2, 4 or 8 hours of non-use for maximum energy savings and extended compressor life
- Built-in condensation drain to eliminate water accumulation
- Automatic rotor recognition and imbalance detection for maximum operational safety
MENU
GB | GBP
GB | GBP
-
- Benchtop Centrifuges
- Floor-Standing Centrifuges
- Refrigerated Centrifuges
- Microcentrifuges
- Multipurpose Centrifuges
- High-Speed Centrifuges
- Ultracentrifuges
- Concentrator
- High-Speed and Ultracentrifugation Consumables
- Accessories
- Tubes
- Plates
- Device Management Software
- Sample and Information Management
- IVD Products
No results found
Search Suggestions
Centrifuge 5427 R (EU-IVD)
Centrifuge 5427 R
The Centrifuge 5427 R is a non-automatic centrifuge for the separation of liquid substance mixtures from the human body and is specifically intended to be used as an accessory together with an in vitro diagnostic device and to enable its use according to its intended purpose. This product complies with the requirements of the EU In Vitro Diagnostics Regulation (IVDR) 2017/746. Eppendorf centrifuges are exclusively intended for indoor use by trained specialists.
The Centrifuge 5427 R is a non-automatic centrifuge for the separation of liquid substance mixtures from the human body and is specifically intended to be used as an accessory together with an in vitro diagnostic device and to enable its use according to its intended purpose. This product complies with the requirements of the EU In Vitro Diagnostics Regulation (IVDR) 2017/746. Eppendorf centrifuges are exclusively intended for indoor use by trained specialists.
-
IVD
Product Information
- rotary knobs, refrigerated, without rotor
- ACT, 230 V/50 – 60 Hz (GB)
You will find additional download material at the bottom of this page
Technical Data
Features
Technical Data
| Specifications | Centrifuge 5427 R |
|---|
| ACT label | yes |
| Max. RCF | 25001 × g |
| Max. RCF with fixed-angle rotor | 25001 × g |
| Max. RCF with swing-bucket rotor | 16049 × g |
| Speed | 100 – 16,220 rpm (50 rpm steps) |
| Product type | Centrifuges |
| Rotors available | 9 |
| Max. capacity | 48 × 1.5/2.0 mL |
| Timer | 5 s to 9:59 h |
| SOFT brake function | yes |
| Noise level | < 55 dB(A) with rotor FA-45-48-11 |
| Power supply | 230 V, 50 – 60 Hz |
| Max. power consumption | 495 W |
| Dimensions (W × D × H) | 31.9 × 54.0 × 25.4 cm / 12.6 × 21.3 × 10 in |
| Product weight | 30 kg / 66.1 lb |
| Height (with open lid) | 56 cm / 21.9 in |
| Cooling | refrigerated |
| Remote Device Monitoring and Notifications (VisioNize®) | VisioNize® box enabled |
| Temperature range | -11 °C to +40 °C (This represents the minimum and maximum temperatures that can theoretically be reached. Please note that the actual minimum and maximum temperatures depend on the rotor and speed used.) |
