- Up to 15-position worktable
- Volume range from 0.2 to 1,000 µL (depending on dispensing tools used)
- Automatic tool exchange for up to 4 tools
- MultiCon PC controller with simulation, network and software upgrade options
- A plate magnet together with thermal mixer enables magnetic bead-based purification in plates
- Range of features can differ depending on system configuration
MENU
AR | ARS
AR | ARS
You are about to leave this site.
Please be aware that your current cart is not saved yet and cannot be restored on the new site nor when you come back. If you want to save your cart please login in into your account.
No results found
Search Suggestions
epMotion® 5073t NGS Solution
Product Information
- MultiCon PC, 3 tools, gripper, plus NGS specific accessories and consumables, waste bags and holder
- 100 – 240 V ±10 %/50 – 60 Hz ±5 % (EU/AU/CN/GB/US), 0,2 µL – 1 mL, (depending on dispensing tools)
You will find additional download material at the bottom of this page
Technical Data
Features
Technical Data
| Specifications | epMotion® 5073t NGS Solution |
|---|
|
Eppendorf ThermoMixer® |
|
| Speed | 300 – 2,000 rpm |
| Time range setting | 30 s – 120 min |
| Max. load | 1,000 g / 2.2 lb |
| Temperature range | 15 °C below RT to 95 °C |
| Heating rate | 5 °C/min |
| Cooling rate above RT | 3 °C/min |
| Cooling rate below RT | 1 °C/min |
|
Thermal module |
|
| Max. number of modules | − |
| Time range setting | − |
| Temperature range | − |
| Heating rate | − |
| Cooling rate | − |
|
Vacuum unit |
|
| Vacuum max. output | − |
| Suction range | − |
| Suction time | − |
| Volume range | 0,2 µL – 1 mL |
| Operating mode | automation |
| Autoclavable | yes (tools) |
| Power supply | 100 – 240 V ±10 %, 50 – 60 Hz ±5 % |
| Consumables | epT.I.P.S. motion tips as racks or reload |
| Max. power consumption | 400 W |
| Dimensions (W × D × H) | 65 × 61 × 77 cm / 26 × 24 × 30 in |
| Product weight | 63 kg / 139 lb |
| SLAS/ANSI positions | 6 |
