Why should I have my ep Motion serviced at regular intervals?

To ensure the optimum performance and precision of your device. This also enables the early detection of any defects which can then be corrected easily. Only precise and accurate devices ensure successful liquid transfers!

How often does my ep Motion need to be serviced?

The need for service depends on how intensively the device is used and if you are working in a regulated field with special service demands. However, we recommend to have it serviced at least once a year.

What do you need to look out for before carrying out a service?

The device needs to be decontaminated first. The device must be freely accessible and all samples removed from the device.

What types of service programs are available for ep Motion ?

The available service programs can be found under the respective instrument in the Service & Support / Maintenance and Certification Services section.

Why do the dispensing tools of my ep Motion need to be calibrated?

The dispensing tools are precision devices. Servicing and calibration at regular intervals ensure a consistently high precision of the results. We provide documentation in support for GLP to assist you.

How often do dispensing tools need to be calibrated?

As part of his test equipment monitoring process, the operator determines the frequency of the calibration as well as the quantity of the testing volume and the number of measurements for each testing volume. This may vary depending on how often the device is used, by how many operators it is used, the aggressivity of the liquids used and the maximum permissible errors defined by the operator. The dispensing tools of your device will display after 200,000 runs that an inspection is recommended. However, there should be at least 1 calibration per year.

How much are the different ep Motion service programs?

The costs depend on the model and service that is performed. Please contact your local Eppendorf Service.

Who is my local service contact?

Please contact your local Eppendorf Service Team. You find the contact data on our homepage ( www.eppendorf.com ) or in the information materials.

What is IQ or OQ and what do I need them for?

Installation and operational qualification; the IQ documents that the device has been delivered and installed correctly. The OQ checks the correct functioning of a device. IQ/OQ ensure that your quality management requirements are met and that your device operates properly and in accordance with the manufacturer’s specifications.

How often does the OQ need to be carried out for an ep Motion ?

The company is responsible for technical checks of devices. Eppendorf recommends regular device qualifications depending on the intensity of use, however, they should be carried out at least once a year.

Does a service carried out by Eppendorf meet the GMP requirement?

Eppendorf offers global certification services which comply with FDA 21 CFR Part 11, EU GMP Annex 11, GLP and GAMP ® 5 to ensure a consistent, standardized operation. We also enable an uncomplicated validation from the implementation to the shutdown by providing support for the installation und operational qualifications (IQ/OQ) of the device and with the software. The entire qualification is documented in detail and the operator’s personnel is qualified and certified in intensive training sessions.

Which consumables should be replaced at regular intervals?

All three XYZ flex cables should be replaced at least once per year if the machine is used daily.

What types of training or online training do you offer to enable me to improve my skills?

Please visit the Eppendorf webpage about the Eppendorf Training Center ( https://www.eppendorf.com/training or contact your local Eppendorf Service for further information and a quotation.

Why can the dispending tool be calibrated without the user unit ?

The ep Motion dispensing tool is calibrated with the help of the ep Motion Tool Holder. The electronic parameter to control the tools of the ep Motion are always the same in all ep Motion units. Therefore all ep Motion dispensing tool can be calibrated on different units than the user unit. The only exceptions are the TS10 and TM10 dispensing tool. They can only be calibrated with units controlled by epBlue Version 40.5.

text.skipToContent text.skipToNavigation

ZA | ZAR

No results found

Search Suggestions

Product Families

Show all Product Families ()

Article

Show all Articles ()

Content

Show all Content ()

Predecessor epMotion^® 5073 and 5075

Product Information

Are you looking for a great value automated liquid handler? Consider purchasing a previous generation epMotion and count on its long lifespan, supported by our best-in-class service offers. With an epMotion automated liquid handler, you won't have to compromise on performance, flexibility, or ease of use. It handles liquids with the highest precision and accuracy, is easy to program, and can help you automate a variety of molecular biology applications in your lab. Take advantage of this opportunity and order your epMotion liquid handler today − while stocks last!

Show more Product Information

You will find additional download material at the bottom of this page

Sets & Bundles (2)

Services (24)

Accessories (102)

2 Sets & Bundles

Solution for small sample NGS libraries - epMotion 5073m NGS solution

epMotion^® 5073t

completely contained housing, system incl. MultiCon, Eppendorf ThermoMixer^®, epBlue software, keyboard, mouse, waste bags and holder
100 – 240 V ±10 %/50 – 60 Hz ±5 % (EU/AU/CN/GB/US), 0,2 µL – 1 mL, (depending on dispensing tools)

More Product Details ...

Catalog no. 5073000345

epMotion^® 5073t NGS Solution

MultiCon PC, 3 tools, gripper, plus NGS specific accessories and consumables, waste bags and holder
100 – 240 V ±10 %/50 – 60 Hz ±5 % (EU/AU/CN/GB/US), 0,2 µL – 1 mL, (depending on dispensing tools)

More Product Details ...

Catalog no. 5073000978

Show more Products

Added to Your Cart

Product Information

Technical Data

Applications

Features

The epMotion pipetting technology is based on the classic Eppendorf piston-stroke pipettes; thus, protocols previously carried out manually are easily transferred to the liquid handling robot epMotion. Its compatibility with a wide range of predefined consumables allows for the maintenance of established protocols. The required labware and liquid volumes, as well as the tip type and quantity, are checked with an optical sensor prior to each run. The easy-to-use drag-and-drop visual interface makes setting up new methods fast and simple.

Specifications	epMotion^® 5073t	epMotion^® 5073t NGS Solution

Eppendorf ThermoMixer^®
Speed	300 – 2,000 rpm	300 – 2,000 rpm
Time range setting	30 s – 120 min	30 s – 120 min
Max. load	1,000 g / 2.2 lb	1,000 g / 2.2 lb
Temperature range	15 °C below RT to 95 °C	15 °C below RT to 95 °C
Heating rate	5 °C/min	5 °C/min
Cooling rate above RT	3 °C/min	3 °C/min
Cooling rate below RT	1 °C/min	1 °C/min

Volume range	0,2 µL – 1 mL	0,2 µL – 1 mL
Operating mode	automation	automation
Autoclavable	yes (tools)	yes (tools)
Power supply	100 – 240 V ±10 %, 50 – 60 Hz ±5 %	100 – 240 V ±10 %, 50 – 60 Hz ±5 %
Consumables	epT.I.P.S. motion tips as racks or reload	epT.I.P.S. motion tips as racks or reload
Max. power consumption	400 W	400 W
Dimensions (W × D × H)	65 × 61 × 77 cm / 26 × 24 × 30 in	65 × 61 × 77 cm / 26 × 24 × 30 in
Product weight	63 kg / 139 lb	63 kg / 139 lb
SLAS/ANSI positions	6	6