Can the MiniSpin/ MiniSpin plus be operated in a cooling room?

The centrifuges can be operated in ambient conditions of 10 - 40 °C. The permitted relative humidity must not exceed 75 %. When transferring the centrifuge from a colder into a warmer environment, the centrifuge must either be allowed to run warm for a half an hour in the cooling room or it must be allowed to warm up in the warmer environment for at least 3 hours. During this time, it must not be connected to a power source. In order to avoid damage from condensation, centrifuges should generally not be submitted to frequent temperature changes.

Is the MiniSpin/ MiniSpin plus equipped with an imbalance switch-off function?

No. These centrifuges have been extensively tested and do not need an imbalance switch-off function.

How high is the noise level of the MiniSpin/ MiniSpin plus?

The measured noise level is less than 49 dB(A) / 52 dB(A) (MiniSpin / MiniSpin plus). Both centrifuges are therefore distinguished by an extremely quiet run.

Are motor brushes required for the drive unit of the MiniSpin/MiniSpin plus?

No, both centrifuges are distinguished by a maintenance-free (inductive) drive unit.

"Err 8" appears on the display. What does this mean?

The error code "Err 8" appears on the display of the centrifuge if the rotor is not screwed tight enough. Therefore check the position of the rotor.

What does "Err 5" mean and how can I restart the MiniSpin/ MiniSpin plus?

The error code "Err 5" appears on the display of the centrifuge if the lid latch is defective. If this error occurs during centrifugation, the device must remain switched on without being operated for 8 minutes. After that, the centrifuge lid can be opened by pressing the "open" button.

What are the maximum values for relative centrifugal force (RCF, g-force) or for the rotational speed (rpm) that can be set for the MiniSpin/ MiniSpin plus?

The maximum rotational speed that can be set for the MiniSpin is 13,400 rpm, equal to 12,100 x g. The maximum rotational speed for the MiniSpin plus is 14,500 rpm, equal to 14,100 x g.

What are the minimum values for the relative centrifugal force (RCF, g-force) or for the rotational speed (rpm) that can be set for the MiniSpin or the MiniSpin plus?

The lowest rotational speed that can be set for both centrifuges is 800 rpm, equal to approx. 50 x g. In contrast to the MiniSpin, the MiniSpin plus can be switched back and forth between rcf and rpm by simultaneously pressing the "speed" arrow keys.

What distinguishes the silver-colored aluminum rotor F-45-12-11 from the black-colored aluminum rotor F-45-12-11 of the MiniSpin/ MiniSpin plus?

The silver rotor F-45-12-11 may only be used in the MiniSpin as it is only permitted for the lower maximum rotational speed of this centrifuge. However, this rotor can no longer be ordered. Instead, like the MiniSpin plus, the MiniSpin is now supplied with the black rotor F-45-12-11.

Can filter inserts that project approx. 1 cm out of the tubes be centrifuged in the MiniSpin/ MiniSpin plus?

These so-called spin columns can be used when the rotor lid used is made of stainless steel. This application is not possible with the older polypropylene lid. Almost all spin columns from a variety of purification kits can be used with the stainless steel lid. Ypur local contact would be pleased to answer any further questions concerning tube dimensions.

What is the order number for the polypropylene lid of the rotor F-45-12-11?

The polypropylene lid for the rotor F-45-12-11 of the MiniSpin/ MiniSpin plus can no longer be ordered. In its place, a stainless steel lid distinguished by a high degree of chemical resistance and enabling the use of particularly long and previously unusable spin columns is now available under the order number 5452 702.000.

text.skipToContent text.skipToNavigation

SE | SEK

No results found

Search Suggestions

Product Families

Show all Product Families ()

Article

Show all Articles ()

Content

Show all Content ()

MiniSpin^®/ MiniSpin^® plus - Mini Centrifuge

Entry-level mini centrifuges – MiniSpin® and MiniSpin® plus with open lid

Soft-touch lid closure on the mini centrifuge MiniSpin® and MiniSpin® plus

Entry-level mini centrifuges – MiniSpin® and MiniSpin® plus

Keypad control on the mini centrifuge MiniSpin® and MiniSpin® plus

Rotor F45-12-11 for mini centrifuge MiniSpin® plus with lid

General Lab Product Version

Product Information

MiniSpin^® and MiniSpin^® plus are entry-level mini centrifuges that are powerful, easy-to-use and small enough to allow individual workstations to be equipped with a portable centrifuge.

Show more Product Information

You will find additional download material at the bottom of this page

Sets & Bundles (2)

Services (11)

Rotors (2)

Accessories (4)

2 Sets & Bundles

Centrifuge MiniSpin^® (EU-IVD)

keypad, non-refrigerated, with Rotor F-45-12-11
230 V/50 – 60 Hz (EU)

More Product Details ...

Quantity

Check stock

Catalog no. 5452000018

Price

14 400,00 SEK

Inquire

Soft-touch lid closure on the mini centrifuge MiniSpin<sup>®</sup> and MiniSpin<sup>®</sup> plus

Centrifuge MiniSpin^® plus (EU-IVD)

keypad, non-refrigerated, with Rotor F-45-12-11
230 V/50 – 60 Hz (EU)

More Product Details ...

Quantity

Check stock

Catalog no. 5453000011

Price

18 700,00 SEK

Inquire

Show more Products

Added to Your Cart

Product Information

Technical Data

Applications

Features

MiniSpin^® and MiniSpin^® plus: Powerful and portable mini centrifuges

Powerful and user-friendly MiniSpin^® and MiniSpin^® plus are small enough so that each workstation can be equipped with a "personal" mini centrifuge. Two models are available to meet your performance requirements: the centrifuge MiniSpin model delivers speeds up to 12,100 x g and the MiniSpin plus model provides speed sufficient for molecular biology applications (up to 14,100 x g).

Everyday centrifugation made easy: Mini centrifuge price and models

Everyday centrifugation tasks become easier with the centrifuge MiniSpin^® and centrifuge MiniSpin^® plus mini centrifuges. Both offer soft-touch one-finger lid closure for ergonomic lid locking and automatic lid opening at the end of the run to prevent sample warming and to enable easy access to samples. For our small centrifuge machine price structure please see the product overview above.

Extremely compact portable centrifuges

These portable mini centrifuges have an extremely compact footprint and a user-friendly keypad with a separate short-spin key to enable fast and comfortable centrifugation.

The rotor fits 12 x 1.5 mL or 2.0 mL vessels, an additional rotor option is also available for up to 2 x 8-tube PCR strips.

Proud owner of an Eppendorf product? Already registered?

Did you know that if you register your Eppendorf MiniSpin^® with us you will get the following?
• 100 epPoints^® (for each product you register) to redeem in our rewards shop
• Additional 3 months warranty when you register a centrifuge, shaker, CO₂ incubator or cycler
• Entry in an exclusive Eppendorf prize draw (for each product you register)
• Get your personal product story to be posted on the Eppendorf website

Getting started is super easy! Either -
1. Download the Eppendorf App, scan and register OR
2. Visit our webpage, log onto your myEppendorf account and enter the product serial number
More information: www.eppendorf.link/product-registration

End-of-life

Disposal of packaging
The packaging of the mini centrifuge contains different materials, this can include a wooden pallet, cardboard, a plastic dust cover, and some foam parts. Recycling of materials becomes more and more important every day: Are you aware that nearly all cardboard material is recycled in Europe? Our centrifuge packaging cardboard material consists of ca. 50% recycling material. Please support the global sustainability initiative of recycling valuable raw material by also collecting the freezer cardboard packaging material and disposing of it in the appropriate collection container at your organization. In respect to the plastic dust cover made of LD-PE and the foam parts, we recommend to select a dedicated recycling partner where PE material can be recycled. We suggest you contact your local waste hauler or facility management team to understand the available recycling options for your organization.

Disposal of instrument
Our mini centrifuges last for many years, but if they need to be replaced, we kindly ask you to fulfill local requirements for disposal of these instruments. We strongly recommend a certified local recycling partner with experience in instruments with active cooling. Keeping it “local“ reduces the impact of transportation, and the "certified" aspect is recommended due to the safe and sustainable removal and recycling of the cooling liquids if it is a refrigerated centrifuge.

Decontamination
This piece of equipment was used in a laboratory and/ or was used to handle biological samples. Please keep in mind to adequately decontaminate the equipment which needs to be disposed. Check local requirements. For more information, get in contact with your local biosafety officer and/ or waste officer. Check if your local recycling partner has special instructions and/ or documentation requirements. You may also use the Eppendorf decontamination form sheet as guidance.

Read Less

Specifications	MiniSpin^®	MiniSpin^® plus

Max. RCF	12100 × g	14100 × g
Max. RCF with fixed-angle rotor	12100 × g	14100 × g
Speed	800 – 13,400 rpm (100 rpm steps)	800 – 14,500 rpm (100 rpm steps)
Product type	Centrifuges	Centrifuges
Rotors available	2	2
Max. capacity	12 × 1.5/2.0 mL	12 × 1.5/2.0 mL
Acceleration time¹⁾	13 s	13 s
Deceleration time¹⁾	12 s	12 s
Timer	15 s – 30 min	15 s to 99 min, with continuous run function
Noise level	< 49 dB(A)	<52 dB(A)
Power supply	230 V, 50 – 60 Hz	230 V, 50 – 60 Hz
Max. power consumption	70 W	85 W
Dimensions (W × D × H)	22,5 × 23,0 × 13,0 cm / 8,86 × 9,06 × 5,12 in	22,5 × 23,0 × 13,0 cm / 8,86 × 9,06 × 5,12 in
Product weight	3,7 kg / 8,16 lb	3,7 kg / 8,16 lb
Height (with open lid)	25 cm / 9,8 in	25 cm / 9,8 in
Cooling	non-refrigerated	non-refrigerated

1)Acceleration and deceleration times may vary depending on rotor, load and voltage version.

Downloads: MiniSpin^®/ MiniSpin^® plus

Brochure

Your Daily Companion (IVD) (IVD)

Eppendorf Microcentrifuges

PDF 8.0MB

English

Selection Guide

Centrifuge Family Overview (IVD)

Overview of all Centrifuges: Capacity and Technical Data

PDF 2.2MB

English

You might also consider

DNA LoBind® tubes - 0.5 mL, 1.5 mL, 2 mL and 5 mL with closed lid

Eppendorf Safe-Lock Tubes

Eppis - Eppendorf Safe-Lock Tubes offer special protection against unintentional opening and completely eliminate any danger of leaks during incubation and storage

MixMate^®

The Eppendorf MixMate can mix and vortex samples. Dedicated exchangeable tubeholders for different vessel formats provide flexibility.

MiniSpin^®/ MiniSpin^® plus - Mini Centrifuge

Do I need IVD?

Product Information

Product Information

MiniSpin^® and MiniSpin^® plus: Powerful and portable mini centrifuges