Fibra-Cel Disks are usable in glass, single-use, and sterilize -in-place bioreactors. By combining Fibra-Cel Disks with the Eppendorf proprietary packed-bed impeller system, you create a three-dimensional matrix. The packed-bed impeller forms a compartment inside the bioreactor, in which the Fibra-Cel Disks and the cells attached to them are entrapped.
• Proven culture success with a variety of cell lines.
• High surface to volume ratio supports high cell densities and productivities.
• Low-shear environment facilitates the cultivation of sensitive cells.
MENU
IT | EUR
-
-
-
- Assistenza per bioprocessi
- Assistenza per centrifughe e rotori
- Assistenza per Mastercycler
- Assistenza per l'automazione
- Assistenza per ultracongelatori
- Assistenza per incubatori
- Assistenza per agitatori
- Assistenza per la fotometria
- Assistenza per regolazione termica e miscelazione
- Assistenza per pipette
-
-
-
-
- Assistenza per bioprocessi
- Assistenza per centrifughe e rotori
- Assistenza per Mastercycler
- Assistenza per l'automazione
- Assistenza per ultracongelatori
- Assistenza per incubatori
- Assistenza per agitatori
- Assistenza per la fotometria
- Assistenza per regolazione termica e miscelazione
- Assistenza per pipette
-
IT | EUR
-
- Centrifughe da banco
- Centrifughe da pavimento
- Centrifughe refrigerate
- Microcentrifughe
- Centrifughe multiuso
- Centrifughe ad alta velocità
- Ultracentrifughe
- Concentratore
- High-Speed and Ultracentrifugation Consumables
- Accessori
- Provette
- Piastre
- Gestione degli apparecchi
- Gestione di campioni e informazioni
- Prodotti IVD
Nessun risultato trovato
Cerca suggerimenti
Fibra-Cel® Disks
Fibra-Cel disks
Fibra-Cel disks
Fibra-Cel Disks, BioFlo 320, SciVario twin packed-bed glass vessel
Fibra-Cel Disks, BioFlo 320, SciVario twin, BioBLU BioBLU 5p
Fibra-Cel disks blue version, 2
Informazioni sul prodotto
Fibra-Cel Disks are a solid support growth matrix for mammalian and insect cells, used predominantly for production of secreted products such as recombinant proteins and viruses. When combined with the Eppendorf proprietary packed-bed impeller system, Fibra-Cel Disks enable growth of adherent cells in stirred-tank bioreactors and eliminate the need for cell filtration to separate cells from the end product. Fibra-Cel Disks are suitable for the use in manufacturing environments.Troverai ulteriore materiale scaricabilein fondo a questa pagina
Prodotti (3)
3 Prodotti
|
|
|
|
|
Mostra più prodotti
Aggiunto al tuo carrello
Informazioni sul prodotto
Applicazioni
Caratteristiche
Informazioni sul prodotto
Fibra-Cel Disk structure
Fibra-Cel Disks consist of a three-dimensional polyester/polypropylene mesh to which cells attach.
• Attachment matrix with a diameter of 6 mm.
• Electrostatically pretreated to support cell adhesion.
• High surface to volume ratio.
• Provide a low-shear environment as the cells become embedded in the three-dimensional fiber system.
Packed-bed impeller for the cultivation of adherent cells in bioreactors
The packed-bed impeller forms a compartment inside the bioreactor, in which the Fibra-Cel Disks and the cells attached to them are entrapped.
• High and uniform mass transfer of nutrients and oxygen.
• Bubble-free aeration in and around the packed bed, which is advantageous for the cultivation of shear sensitive cells.
• Low pressure drop across the bed minimizes variability and maintains viability of cells over the entire bed.
Simple procedures from inoculation to harvest
When you inoculate your bioreactor, the cells become entrapped within the Fibra-Cel Disk bed, where they remain throughout the process.
• Cell attachment takes usually only up to one hour.
• Easy harvest of medium and secreted products without the need for cell separation.
• Easy setup of perfusion processes. The cells remain in the packed-bed which makes filtration unnecessary and therefore avoids the danger of filter clogging.
For the use in manufacturing environments
• Fibra-Cel Disks come with enhanced, consistent and comprehensive documentation supporting the use in manufacturing environments.
• All polymeric materials of Fibra-Cel Disks as well as the manufacturing process can be declared as animal derived ingredient free or meet the guidelines outlined in EMA/410/01. As such, these materials can be declared as free of BSE/TSE.
• Detailed information is available in a validation guide with the documentation to assist with the qualification of Fibra-Cel Disks in the intended process.
Fibra-Cel Disks – Documentation package
Customers purchasing Fibra-Cel Disks can download a turnover package with documentation, which they can use for qualification of Fibra-Cel Disks for their intended process. It contains:
• Certificate of Analysis
• Certificate of Quality
• Validation Guide
• Extractables Testing Report
HEK 293 cells grown on Fibra-Cel Disk at day 7 of the growth cycle
Leggi di più
Leggi di meno
Applicazioni
- A selection of cell types successfully grown on Fibra-Cel Disks: Vero, adherent HEK 293, BHK, CHO, mesenchymal stem cells, hybridoma, insect cells
- Typical products and applications: Recombinant protein expression, rVSV production, lentiviral vector production, rabies virus production, stem cell expansion
- Although Fibra-Cel Disks are designed for use in packed-bed bioreactors, there are also examples in the literature of their use in shake flasks and disposable bags.
Caratteristiche
- Fibra-Cel Disks are manufactured in an ISO class 7 clean room
- Fibra-Cel Disks are autoclavable
- High surface area of 1200cm2/g
Download: Fibra-Cel® Disks
-
Inglese
