Are the epT.I.P.S. Box / epT.I.P.S. Box 2.0 and the epT.I.P.S. Racks UV-resistant?

The UV stability of epT.I.P.S. box / epT.I.P.S. Box 2.0 (made of polycarbonate) as well as of the epT.I.P.S. racks (made of polypropylene) were tested intensively during development. Boxes and racks were exposed to 254 nm UV light (1 J/cm2) for 16.7 hours. After 10 cycles (167 hours), no signs of adverse effects were detectable. Because the energy of the lamp used is considerably higher than that of a lamp used in a sterile bench, it can be assumed that both boxes can be exposed to UV radiation for at least 300 to 600 hours in a sterile bench without problems. Polypropylene used for epTIPS Racks is three times more resistant against UV radiation than polycarbonate allowing even longer exposure to UV light. If a disinfectant is applied prior to UV irradiation make sure to take off the reagent by wiping off using a cloth soaked in water.

Are Eppendorf products free of RNA?

All products certified with "PCR clean" are tested free of human DNA, DNase, RNase and PCR inhibitors. The following applies from our point of view: Where no human DNA is detected, there can also be no RNA, which is considerably more unstable.

What is the meaning of the PCR Clean seal?

For molecular-biological requirements Eppendorf offers a new standard for uniform purity specifications. All consumables marked with the "Certified PCR Clean” label are guaranteed free of human DNA, DNase, RNase and PCR inhibitors.

How do you make your Biopur products free of pyrogens?

All Biopur products are manufactured fully automatically under cleanroom conditions. This eliminates contamination of the disposables through contact with people. An independent laboratory checks that each individual batch is free of pyrogens.Additionally the products are sterilized by radiation or treatment with ethylene oxide.

What is the shelf life of Eppendorf Biopur products?

If the Biopur products are stored according to the information in the instruction manual they have a shelf life of 5 years. The minimum expiry date is printed on the label of the box.

Why are there double labels on the folding boxes, as "PCR clean" + "Sterile" or "PCR clean" + "Protein-free"?

Due to the modularization of purity grades, some products are labeled with more than one purity grade symbol. For example, the epDualfilter T.I.P.S. has the double seal "PCR clean "+ "Sterile" and the UVette the double seal "PCR clean" + "Protein-free" on the packing. The certification remains unaffected by the modularization.

Are batch-specific certificates for the new purity grades available in the internet?

Yes, the batch-specific purity grades can be downloaded at our certificates homepage .

Can products of the previous and new modular purity grades (with new seals) be used simultaneously in one application?

Yes, if no batch attachment is required for the application, products of the old and new modular purity grades can be used, as their specifications are the same.

What are the reasons for using single-use plasticware in the laboratory?

Contamination and cross-over can only be avoided by using single-use plastic items. In addition, there is no annoying and time-consuming cleaning of glassware.

How are Eppendorf pipette tips tinted?

Organic, heavy-metal-free dyes (PP granulate) are used to tint the pipette tips.

Is a reload available for the 5 mL epTIPS Box?

No, the 5 mL epTIPS Box will be filled with epTIPS Standard.

Do Eppendorf pipette tips contain heavy metals?

The potential release of trace metal ions from the epTIPS under extreme conditions was measured by an independent and certified laboratory. The certificate that provides exact concentration per metal is provided as a pdf on our certificates homepage .

Are Eppendorf pipette tips free of silicone / silicone oil?

Neither silicone nor silicone oil is added during the production process of epT.I.P.S. pipette tips.

Up to which temperature can solutions be dispensed with epTIPS?

The epTIPS made of PP are suitable for liquids with a temperature of max. 90°C. Please take into account that the pipetting error rises due to evaporation into and warming of the air cushion.

To destroy prions, an autoclave step at 136 °C and 3 atm must be carried out. Can the epTIPS Box (or epTIPS Rack Biopur) withstand this?

No, the epTIPS Box or the epTIPS Rack Biopur cannot be autoclaved at 136 °C.

Must the lid on epT.I.P.S. Boxes / epT.I.P.S. Boxes 2.0 be opened for autoclaving?

No, the boxes can be autoclaved with the lid closed.

Can the epT.I.P.S. Box / epT.I.P.S. Box 2.0 be autoclaved at 133 °C?

No, the epT.I.P.S. Box / epT.I.P.S. Box 2.0 cannot be autoclaved at 133 °C. We recommend 121 °C.

Is the epT.I.P.S. Box 2.0 compatible with the Reloads for the forerunner epT.I.P.S. Box?

Yes, the epT.I.P.S. ® Box 2.0 is compatible with all epT.I.P.S. Reloads and all epT.I.P.S. BioBased Reloads.

What is the difference between epT.I.P.S. Box / epT.I.P.S. Box 2.0 and epT.I.P.S. Rack?

The epT.I.P.S. ® Box 2.0 in the new design, equipped with additional benefits, is the successor product of the epT.I.P.S. ® Box used in the market since 2002. Like its predecessor, the epT.I.P.S. Box 2.0 can be autoclaved up to 100 times and can be filled with all epT.I.P.S. Reload variants for pipette tips in Eppendorf Quality, PCR clean, Biopur ® and PCR clean/Sterile. Please note: the reload variants for tips in Biopur ® and PCR clean/Sterile can only be used in the epT.I.P.S. ® Box 2.0. They do not fit into the predecessor epT.I.P.S. Box. The epT.I.P.S. ® Racks are disposable and destined only for single use and are available in the purity grades Biopur ® and PCR clean/Sterile. For detailed information visit: www.eppendorf.com/discover/the-magician-eptipsr-boxes-20

How often can the epT.I.P.S. Box / epT.I.P.S. Box 2.0 be autoclaved?

Both boxes can be autoclaved up to 100 times. Stacking of many boxes should be avoided during this process. Please note that if Reloads are inserted, the tray and tips can only be autoclaved once and that filtered tips cannot be autoclaved.

What are the dimensions of the epTIPS standard?

0,1-10 µL: length: 34 mm, diameter work cone: 6 mm, diameter opening: 0,35 mm 0,1-20 µL: length: 40,5 mm, diameter work cone: 6 mm, diameter opening: 0,36 mm 0,5-20 µL: length: 45,7 mm, diameter work cone: 6 mm, diameter opening: 0,37 mm 2-200 µL: length: 52,7 mm, diameter work cone: 7 mm, diameter Öffnung: 0,52 mm 20-300 µL: length: 55 mm, diameter work cone: 7 mm, diameter opening: 0,6 mm 100-1000 µL: length: 70,72 mm, diameter work cone: 8,8 mm, diameter opening: 0,83 mm 1250 µL: length: 75,5 mm, diameter work cone: 8,8 mm, diameter opening: 1,0 mm 2,5 mL: length: 115 mm, diameter work cone: 12 mm, diameter opening: 1,32 mm 5 mL: length: 120,3 mm, diameter work cone: 15,5 mm, diameter opening: 1,65 mm

Are the polypropylene pipette tips UV-resistant?

Yes. Use on a sterile bench, for example, is safe.

If epT.I.P.S. Reloads are to be autoclaved, does the film- and plastic-packaging need to be removed?

Yes, under no circumstances should the film be autoclaved alongside the tips. Please note that stacked reloads can only be autoclaved one time, when inserted individually into the epT.I.P.S. Box or epT.I.P.S. ® Box 2.0. Reloads for pipette (filter) tips in Biopur ® or PCR clean/Sterile cannot be autoclaved.

How often can the epTIPS Boxes be autoclaved?

The box can be autoclaved up to 100 times, the reloads up to 5 times.

Must the lid on epTIPS Boxes be opened for autoclaving?

No, the boxes can be autoclaved with the lid closed.

Can the epTIPS Boxes be autoclaved at 133 °C?

No, the epTIPS Box cannot be autoclaved at 133 °C. We recommend 121 °C.

Is the epTIPS Box or are the epTIPS Racks UV-resistant?

The UV stability of epTIPS boxes (made of polycarbonate) and epTIPS racks (made of polypropylene) were tested intensively during development. Boxes and racks were exposed to 254 nm UV light (1 J/cm2) for 16.7 hours. After 10 cycles (167 hours), no signs of adverse effects were detectable. Because the energy of the lamp used is considerably higher than that of a lamp used in a sterile bench, it can be assumed that both boxes can be exposed to UV radiation for at least 300 to 600 hours in a sterile bench without problems. Polypropylene used for epTIPS Racks is three times more resistant against UV radiation than polycarbonate allowing even longer exposure to UV light.

text.skipToContent text.skipToNavigation

BD | BDT

No results found

Search Suggestions

Product Families

Show all Product Families ()

Article

Show all Articles ()

Content

Show all Content ()

epT.I.P.S.^® - Pipette Tips

Eppendorf epT.I.P.S._REG_ – available in sizes from 0.1_NBSP__MICRO_L to 10_NBSP_mL

Eppendorf epT.I.P.S._REG_ work in perfect harmony with your Eppendorf pipettes

Sample being pipetted from elongated ep T.I.P.S._REG_ to Eppendorf LoBind_REG_ deepwell plate

epT.I.P.S._REG_ macro volume tips facilitate easy reach to the bottom of e.g. 15 mL centrifugation tubes or flasks

epT.I.P.S._REG_ Standard pipette tip package: a resealable bag

epT.I.P.S._REG__NBSP_pipette tips Box 2.0 from Eppendorf

epT.I.P.S._REG_ Rack, Biopur_REG_, 2 – 200 _MICRO_L tips

Pre-sterilized epT.I.P.S._REG_ and ep Dualfilter T.I.P.S._REG_ pipett tip variants are available in Racks

Product Information

epT.I.P.S. pipette tips work in perfect harmony with your Eppendorf pipettes! The ergonomically designed cone geometry allows for complete sealing as well as minimal attachment and ejection forces. These pipette tips meet EN ISO 8655 requirements and can also be used with pipettes from other manufacturers.

Show more Product Information

Important customer information on Boxes and Sets: change of article numbers

You will find additional download material at the bottom of this page

Product Information

Applications

Features

The perfect fit for your Eppendorf pipette: epT.I.P.S. ensure a pipetting system you can rely on
Make everyday work easier and more enjoyable with the epT.I.P.S. (Eppendorf "Totally Integrated Pipetting System") pipette tips. These pipette tips are manufactured to extremely high quality and purity standards and are designed to cover all of the specific needs of your samples. Offering reduced-force tip attachment and ejection with complete sealing, epT.I.P.S. work in perfect combination with your Eppendorf pipettes and form a fully integrated pipetting system that delivers maximum precision, accuracy and reproducibility.
Eppendorf pipette tips with ideal wetting properties and optimum transparency are manufactured exclusively from high-purity plastic materials. epT.I.P.S. pipette tips are also available in a range of certified purity grades: Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur^®. Choose the pipette tips quality and purity you need to always get reproducible results for your experiments. The universal nose cone design allows Eppendorf tips to also be used with pipettes from other manufacturers.

Pipette tips of the purity grade Eppendorf Biopur^® are either individually packaged or offered in disposable Racks, the Rack body of which is made of "single source" intra-type collection polypropylene recyclate from contact lens manufacturing. As epT.I.P.S.^® BioBased in Biopur^® they are available in sterile Reloads for insertion into the epT.I.P.S.^® Box 2.0. PCR clean pipette tips are available in non-sterile Reloads. Eppendorf Quality pipette tips are also available pre-assembled in Reloads or as bulk ware in bags. All Reloads variants can be easily inserted into the matching epT.I.P.S. Box 2.0.

How can you recognize an original Eppendorf pipette tip?
All Eppendorf tips feature a "ring" of drop-shaped relief elements on the edge of the tip crown.

Extended length for reliable sampling: epT.I.P.S. L pipette tips
The elongated pipette tips - epT.I.P.S. L - enable you to reliably reach your sample while pipetting from and into conical tubes, high reagent bottles, narrow deep vessels, cell culture flasks or deepwell plates. The long and slim design of these elongated pipette tips gives you free access to your sample with reduced risk of touching the sides of tubes or wells. Cross-contamination during pipetting can be reduced to a minimum. epT.I.P.S. L are available in volumes of: 0.5 – 20 µL, 50 – 1,250 µL, 0.2 – 5 mL and 0.5 – 10 mL.

Disposal of epT.I.P.S. pipette tips and their packaging material

Recycling of materials becomes more and more important every day. E.g. in Europe almost 100 % of cardboard material is already recycled. The packaging material of the epT.I.P.S. pipette tips is made of different materials – for the most part made from cardboard.
Eppendorf consumables and thus also epT.I.P.S. pipette tips are shipped in packaging in which both the shipping carton consists of at least 37 % and the folding carton consist of at least 60 % recycled cardboard.
Please support our global sustainability initiative of recycling valuable raw material by collecting the cardboard packaging material of tubes. Dispose of the packaging material in the designated collection containers in your organization and region. In respect to the wrapping foils made of Polyethylene (PE) for epT.I.P.S. Standard we recommend you select a dedicated recycling partner where PE material can be recycled. Contact your facility or local waste management company to understand the available recycling options for your organization.
After usage, the tips themselves are defined as potentially being contaminated. This contamination can be based on biohazard, chemical hazard, or even nuclear hazard. Therefore, recycling of these tips can be challenging. In many countries, critical waste must be burned due to legal restrictions. However, energy and heat can be recovered from thermal recycling of contaminated laboratory consumables.
To reduce the amount of critical plastic waste, you should use at least two waste containers: One for critical waste and one for non-critical waste. The definition of these two groups may depend on local regulations and should be communicated/trained in your lab accordingly. For further local waste recycling options please contact your local biosafety officer and your local waste management.
We strongly recommend a certified local recycling partner. Keeping it "local" will reduce the impact of transportation, and the "certified" aspect is recommended due to the safe and sustainable handling of lab waste.

Read Less

Downloads: epT.I.P.S.^®

Flyer

Compatibility of epT.I.P.S.^® 5 mL and 5 mL L Pipette Tips with Different Vessel Types

PDF .5MB

English

Flyer

Eppendorf Purity Grades Selection Guide

PDF .8MB

English

Flyer

Form Follows Function

PDF .9MB

English

Poster

How to Become More Sustainable in Your Lab

Reduce waste, reuse materials, and recycle whenever possible – these are the tips you need

Refill epT.I.P.S.^® Boxes 2.0 with Reloads

PDF 9.4MB

English

Flyer

Modern Design – Less Plastic

epT.I.P.S. Racks completely renewed!

PDF 5.6MB

English

Flyer

New Racks – Improved Sustainability

How to reduce plastics in the lab – The epT.I.P.S.^® solution

PDF 1.4MB

English

Flyer

Sustainability Facts and Figures

New epT.I.P.S.^® Racks: Less plastic - less waste

PDF .8MB

English

Brochure

You Name It, We Have It

epT.I.P.S.^® packaging options – for all your needs

PDF 4.0MB

English

You might also consider

Eppendorf Deepwell Plates

High-quality, superior performance Eppendorf Deepwell Plates.

Eppendorf Microplate with OptiTrack_REG_ matrix

Eppendorf Microplates

Unrivalled transparency with the Eppendorf Microplate

An opened Eppendorf PCR tube that is certified free of a range of common PCR contaminants

Eppendorf PCR Tubes

High quality single tubes and tube strips. These tubes allow for optimized heat transfer, are easy to open and provide tight sealing to prevent evaporation in PCR. Different formats available.

DNA LoBind_REG_ tubes - 0.5 mL, 1.5 mL, 2 mL and 5 mL with closed lid

Eppendorf Safe-Lock Tubes

Eppis - Eppendorf Safe-Lock Tubes offer special protection against unintentional opening and completely eliminate any danger of leaks during incubation and storage

epT.I.P.S.^® BioBased

Pipette tips made from 100 % bio-based plastic which can be traced back to biological waste material. Available in volumes from 10 µL to 1,250 µL Long in Reloads for use with epT.I.P.S.^® Box 2.0. Ideal for use in microbiology and molecular biology.

You are about to leave this site.

epT.I.P.S.® - Pipette Tips

epT.I.P.S. cone edge with ACT label

Eppendorf epT.I.P.S.® – available in sizes from 0.1 µL to 10 mL

Eppendorf epT.I.P.S.® work in perfect harmony with your Eppendorf pipettes

epT.I.P.S.® L elongated pipette tips in use to fill a Deepwell plate

epT.I.P.S. Rack 200µL rack body made of 100% recyclate

epT.I.P.S. Racks 200µL detail, rack body made of 100% recyclate

epT.I.P.S.® macro volume tips facilitate easy reach to the bottom of e.g. 15 mL centrifugation tubes or flasks

epT.I.P.S.® macro volume tips facilitate easy reach to the bottom of e.g. 15 mL centrifugation tubes or flasks

epT.I.P.S.® macro volume tips facilitate easy reach to the bottom of e.g. 15 mL centrifugation tubes or flasks

epT.I.P.S.® Standard pipette tip package: a resealable bag

epT.I.P.S. Box 2.0 family, 3 boxes, 01

epT.I.P.S. Box 2.0 box with tips in tray

epT.I.P.S. Reloads family

epT.I.P.S. Reloads 2 versions, stacked and stacked against each other