Are Eppendorf products free of RNA?

All products certified with "PCR clean" are tested free of human DNA, DNase, RNase and PCR inhibitors. The following applies from our point of view: Where no human DNA is detected, there can also be no RNA, which is considerably more unstable.

What is the meaning of the PCR Clean seal?

For molecular-biological requirements Eppendorf offers a new standard for uniform purity specifications. All consumables marked with the "Certified PCR Clean” label are guaranteed free of human DNA, DNase, RNase and PCR inhibitors.

Why are there double labels on the folding boxes, as "PCR clean" + "Sterile" or "PCR clean" + "Protein-free"?

Due to the modularization of purity grades, some products are labeled with more than one purity grade symbol. For example, the epDualfilter T.I.P.S. has the double seal "PCR clean "+ "Sterile" and the UVette the double seal "PCR clean" + "Protein-free" on the packing. The certification remains unaffected by the modularization.

Are batch-specific certificates for the new purity grades available in the internet?

Yes, the batch-specific purity grades can be downloaded at our certificates homepage .

Can products of the previous and new modular purity grades (with new seals) be used simultaneously in one application?

Yes, if no batch attachment is required for the application, products of the old and new modular purity grades can be used, as their specifications are the same.

Can the lid of the Standard Micro Test Tube 3810X be pierced as easily as that of the Safe-Lock micro test tube?

No. It is more easy to pierce a Safe-Lock Tube because of the thin membrane in the middle of the lid.

What is the life expectancy of Eppendorf Tubes?

At least 5 years at a storage temperature of +5 to +35 °C. If unopened and properly stored Eppendorf Tubes have shelf-life of 8 Years (standard Eppendorf Quality) or 5 Years on a purity grade (Biopur, PCRclean, Sterile, Forensic DNA Grade, ). Please observe " Instruction for Use" for storage condition recommendations: - Instruction for Use (IFU) of Tubes - Conical tubes, SafeCode tubes and SnapTec tubes - Instruction for Use of 5 mL Tubes - Instruction für Use of LoBind Tubes

From what material are Eppendorf Tubes manufactured?

All Eppendorf Tubes are manufactured from virgin polypropylene. The used polypropylene (PP) fulfils the specifications of the FDA for the use of plastics for foodstuffs. During production, no slip agents, biocides, or plasticizers are used. Colorants are free of biological material, free of heavy metals, and free of melamine. No metal-based dyes are used. Please see General Quality Certificate for epT.I.P.S, Combitips ® advanced, ViscoTip, Tubes, Plates, UVette.

Do you offer siliconized micro test tubes?

Our tube assortment does not include coated or siliconized tubes. In order to keep sample loss caused by the adsorption of sample material on the tube wall to a minimum, we recommend using the Eppendorf Protein LoBind Tubes or Eppendorf DNA LoBind Tubes. These are made of a special type of polypropylene and are manufactured under optimized process conditions.

Is there a chemical resistance overview for the individual micro test tube types?

Yes. The Eppendorf Application No. 56 "The best material for original eppis!" includes among other things a detailed material stability overview.

Can Eppendorf micro test tubes be sterilized with ethylene oxide?

Yes, this is possible. Please note that the micro test tubes have to be taken out of the packaging for sterilization. In addition, please note that some ethylene oxide will remain in the material after sterilization.

Can your micro test tubes be frozen at -80 °C?

Yes. Please refer to the operating manual.

Can your micro test tubes be coated with acrylic resin within the framework of a UV polymerization?

Yes, the tubes can withstand UV polymerization. However, we cannot give you any instructions for the procedure.

Can contamination of micro test tubes by bacterial endotoxin be inactivated by autoclaving?

No. Bacterial endotoxins (lipopolysaccharide, LPS) are very stable and withstand normal autoclaving at 121 °C. To inactivate LPS, the objects have to be baked at 250 °C, which, of course, is not possible with plastics.

Are the Eppendorf micro test tubes anti-static?

Our tubes are not produced from antistatic material, i.e. they are basically not antistatic. But it should be noted that the use of antistatic agents during production will destroy or reduce the wettability of the tubes.

Which Eppendorf micro test tubes are free of DNA?

All micro test tubes designated with "PCR clean" are free of human DNA, DNase, RNase and PCR inhibitors. Our Safe-Lock micro test tubes are also available in the "Eppendorf Biopur" purity standard. Due to the special manufacturing processes and the individual blister-packaging, Biopur products are certified "DNA free".

How do you define the temperature entry "RT", for example, as a storage condition for your micro test tubes?

Definition of RT (room temperature): +15 to +25 °C.

What is the best way to label Eppendorf micro test tubes?

The micro test tube should be clean and free from grease and only labeled on the space provided. Water-resistant felt pens from Steadtler S and F, in black, are the most suitable for this. The writing should be left to dry for at least 2 min.

Do Eppendorf Tubes contain heavy metals?

Heavy metal values are available in the general "Certificate of Quality - Tubes - Trace metal". All the values are below the prescribed limits of the listed DIN norm.

Overview regarding the centrifugation resistance of Eppendorf Tubes

Safe-Lock 0.5 mL: 30,000 xg / Biopur 22,000 xg / DNA LoBind 30,000 xg / Protein LoBind 18,000 xg Safe-Lock 1.5 mL: 30,000 xg / Biopur 22,000 xg / DNA LoBind 30,000 xg / Protein LoBind 18,000 xg Safe-Lock 2.0 mL: 25,000 xg / Biopur 22,000 xg / DNA LoBind 25,000 xg / Protein LoBind 18,000 xg 3810X: 30,000 xg 3810: 25,000 xg When using form-fitting adapters and filling the tubes with their nominal volume, centrifugation of the Tubes at 25 °C for 30 min at up to 70,000 x g (RT) is possible. Tubes can be centrifuged in a 45°-fixed-angle rotor at 40 °C sample temperature and 90 min with aqueous saline solution (density 1.0 g/mL) up to the above g-forces. The centrifugation resistance depends on the temperature and will be lower at sample temperatures of > 40 °C. Liquids with a higher density or affect the stability of the tubes (organic solvents, acids) may reduce the mechanical resilience of the tubes. Please always consult the "Instruction for Use" of the respective Tube: - Instruction for Use of Tubes - Instruction for Use of Conical tubes, SafeCode tubes and SnapTec tubes - Instruction for Use of 5 mL Tubes - Instruction fpr Use of LoBind Tubes

Are the Eppendorf tubes autoclavable?

Yes, all Eppendorf tubes are autoclavable when open (20 min, 121 °C, 1 bar).

Are Eppendorf tubes and plates (also LoBind variants) resistant to 100% acetonitrile?

Eppendorf tubes and plates including LoBind variants are resistant against 100% acetonitrile only in room temperature conditions. Above 40°C and prolonged exposure (days) may lead to partial damage and is not recommended. For lower acetonitrile concentrations the resistance parameters will be better so prolonged exposure and higher temperatures may be possible. This must be however tested by the customer.

text.skipToContent text.skipToNavigation

AT | EUR

Es konnten keine Ergebnisse gefunden werden.

Such-Empfehlungen

Produkt Familien

Alle Produkt Familien anzeigen ()

Artikel

Alle Artikel anzeigen ()

Inhalte

Alle Inhalte anzeigen ()

Eppendorf Tubes^® 3810X - Reaktionsgefäß

Colorless Flex-Tube_REG_ microtube with easy-open lid

Eppendorf Tubes_REG__NBSP_3810X microtube in blue with easy-open lid

Flex-Tube_REG_ microtube in green with easy-open lid

Flex-Tube_REG_ microtubes arranged in rotor

Produktinformationen

Das einfach zu öffnende und zu schließende Design der Eppendorf Tubes^® 3810X bietet eine praktische, ergonomische und verlässliche Einhandbedienung. Ob Probenvorbereitung, Zentrifugation oder Lagerung – die Eppendorf Tubes^® 3810X passen perfekt in Ihre Workflows!

Weitere Produktinformationen anzeigen

Dokumente zum Download finden Sie weiter unten auf der Seite

Produktinformationen

Eigenschaften

Das leicht zu öffnende und sicher zu schließende Eppendorf Tubes^® 3810X bietet Komfort und Verlässlichkeit bei der Probenaufbereitung, Zentrifugation und Lagerung. Ein Gefäß für alle Anwendungen in der Molekularbiologie, Chemie und Biochemie.
Jetzt noch sicherer: Eppendorf Tubes^® 3810X sind für die Zentrifugation bis 30.000 × g ausgelegt!

Optimale Materialwahl!

Eppendorf Verbrauchsartikel einschließlich der Eppendorf Tubes^® 3810X bestehen ausschließlich aus hochwertigem, ultrareinem Polypropylen und erfüllen die Reinheitskriterien der FDA-Richtlinien 21 CFR § 177.1520 »Olefin Polymers«, und 21 CFR § 178.2010 »Antioxidants and Stabilizers for Polymers«. Während und nach der Produktion werden umfassende Qualitätsprüfungen durchgeführt. Außerdem wird das fertige Produkt einer Funktionalitätsprüfung unterzogen. Im Rahmen dieser Funktionalitätsprüfungen von Gefäßen wird unter anderem der sichere Deckelverschluss in einem Wasserbad mit kochendem Wasser geprüft sowie die Zentrifugationsbeständigkeit und die Dampfdichtigkeit. Diese Qualitätsprüfungen und Tests sorgen für eine konstant hohe Produktqualität über den ganzen Produktionsverlauf – Charge für Charge. Einzelheiten finden Sie in der APPLICATION NOTE Nr. 056: Das beste Material für original Eppendorf Tubes^® und Plates: Eigenschaften und Chemikalienbeständigkeit von Polypropylen

Höchste Probenintegrität!

Hergestellt ohne Entformungshilfen, Weichmacher und Biozide – Stoffe, die aus Kunstoffverbrauchsartikeln nachweislich in die Probe ausbluten und die Ergebnisse von Bio-–Assays und Messungen negativ beeinflussen, z. B. Nukleinsäure-Quantifizierung durch photometrische Messung bei 260 nm.

Weniger lesen

Downloads: Eppendorf Tubes^® 3810X

Broschüre

Absolute Tubes

Ihre beste Wahl, wenn es um Ihre Probe geht: Eppendorf Tubes^®

Your best choice to care for your sample: Eppendorf Tubes

PDF 3.1MB

Englisch

Flyer

Eppendorf Purity Grades Selection Guide

Eppendorf Forensic DNA Grade gemäß ISO 18385

Eppendorf Forensic DNA Grade according to ISO 18385

PDF 1.3MB

Englisch

Sie könnte auch interessieren

Eppendorf Tubes^® 5.0 mL

Herausragende Microtubes für Proben von 0,5 mL bis 5,0 mL

Twin.tec PCR plates offer ideal features for reproducible PCR

Eppendorf twin.tec^® PCR Plates LoBind^®

Die spezielle Herstellungstechnologie verbindet die hohe Qualität mit den Vorteilen der twin.tec-PCR-Platte LoBind, um die Ausbeute an Zielmolekülen zu maximieren. Automationsfreundlich. Unterschiedliche Formate erhältlich.

An opened Eppendorf PCR tube that is certified free of a range of common PCR contaminants

Eppendorf PCR Tubes

Hochwertige Einzelgefäße und Gefäßstreifen. Diese Gefäße ermöglichen eine optimale Wärmeübertragung, lassen sich leicht öffnen und dichten trotzdem vollständig ab, sodass Verdunstung während der PCR vermieden wird. Unterschiedliche Formate erhältlich.

Achtung Sie verlassen diese Länder-Website.

Eppendorf Tubes® 3810X - Reaktionsgefäß

Easy-open, secure-close microtubes

Colorless Eppendorf Tubes® 3810Xmicrotube with easy-open lid

Eppendorf Tubes® 3810X microtube in blue with easy-open lid

Eppendorf Tubes® 3810X microtube in green with easy-open lid

Eppendorf Tubes® 3810X microtubes arranged in rotor

Produktinformationen

Produkte (6)

Produktinformationen

Optimale Materialwahl!

Höchste Probenintegrität!

Eigenschaften

Downloads: Eppendorf Tubes® 3810X

Broschüren (12)

Zertifikate (5)

Bedienungsanleitungen (2)

Notes & Papers (17)

FAQs (22)

Sie könnte auch interessieren

Eppendorf Tubes® 5.0 mL

Eppendorf twin.tec® PCR Plates LoBind®

Eppendorf PCR Tubes

Eppendorf Tubes^® 3810X - Reaktionsgefäß

Downloads: Eppendorf Tubes^® 3810X

Eppendorf Tubes^® 5.0 mL

Eppendorf twin.tec^® PCR Plates LoBind^®